Cooling Fan not coming on while switch is on, but comes on with switch off?
#1
Cooling Fan not coming on while switch is on, but comes on with switch off?
OK, so I got my used Wolverine out today. The overheating light came on, but the fan never was running with the switch on. When I cut the switch off the fan came on are ran until it cooled. It did this a few different times while riding today. I have tested the fan with 12 volts and it works. We were riding through pretty rough stuff while going pretty slow, so I don't doubt it was getting hot, so I believe the warning light was correct it was overheating. So what would not cause the fan to come on while the ATV is running? As soon as I cut the switch off the fan immediatley cuts on until it cools to an excepatable temp, but doesn't run at all while the switch is on.
#3
Thread
Thread Starter
Forum
Replies
Last Post
bzdok1234
Polaris Ask an Expert! In fond memory of Old Polaris Tech.
30
02-23-2016 01:55 PM
KimSJoh
Polaris Ask an Expert! In fond memory of Old Polaris Tech.
14
07-18-2015 07:20 PM
ranvette
Polaris Ask an Expert! In fond memory of Old Polaris Tech.
2
07-04-2015 06:13 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)