Yamaha Discussions about Yamaha ATVs.

86 4-Zinger carb problems, need help

Thread Tools
 
Search this Thread
 
  #1  
Old 10-22-2011, 07:40 AM
pds23's Avatar
Weekend Warrior
Thread Starter
Join Date: Oct 2011
Posts: 1
Likes: 0
Received 0 Likes on 0 Posts
Default 86 4-Zinger carb problems, need help

I am working on a 86 4-zinger 60 quad, my problem is that after running and shutting it off after about 15 mins it leaks fuel out of the carb drain hose and also will take fuel in the airbox. I have removed the carb, completely cleaned the carb, the float is in plastic float, it is not cracked or taking in fuel, I replaced the needle, I cleaned the seat where the rubber tip of the needle seats and I still have fuel coming out the back of the carb going into the airbox and draining out of the drain after about 15 mins after shutting off. The quad runs awsome but this problem is really starting to be a pain. Any help or info would be greatly appreciated. thanks. Dan
 
  #2  
Old 10-22-2011, 10:03 AM
Knust's Avatar
Trailblazer
Join Date: Sep 2011
Posts: 78
Likes: 0
Received 0 Likes on 0 Posts
Default

Either you need a new float assy. or your float height adjustment is too high. Could also be your bowl vent is plugged. blow through your vent tube with compressed air aand make sure float adjustment is correct.
 
  #3  
Old 10-22-2011, 11:03 AM
Terrellster's Avatar
Pro Rider
Join Date: Jan 2008
Posts: 448
Likes: 0
Received 0 Likes on 0 Posts
Default

Shut off the petcock before you shut off the engine. Let it run at idle for about 45 seconds, then shut off engine. This will at least cut down on the leaking until you figure out the issue.
 
  #4  
Old 10-22-2011, 02:48 PM
Knust's Avatar
Trailblazer
Join Date: Sep 2011
Posts: 78
Likes: 0
Received 0 Likes on 0 Posts
Default

I agree with Terrellster i always shut fuel of when i shut quad off.
 
  #5  
Old 10-23-2011, 10:21 PM
Scooter86's Avatar
Extreme Pro Rider
Knows Old ATV Questions!
Join Date: Sep 2003
Posts: 5,127
Likes: 0
Received 3 Likes on 3 Posts
Default

I just worked on one of these for this problem this spring. The needle valve was a bit corroded on the body. made it just big enough it wouldn't seat well even though the rubber tip was in decent shape. After a little dremel polishing, it worked just fine.
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Ty Speece
Chinese Quads
15
07-02-2015 04:59 PM
generalpops
Polaris
5
06-05-2015 08:23 PM
garyt1975
Kids Quads
2
06-05-2015 08:53 AM
generalpops
Introduce Yourself
1
06-03-2015 08:25 PM
kevbowe
General Chat
0
06-01-2015 01:17 AM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 


Quick Reply: 86 4-Zinger carb problems, need help



All times are GMT -5. The time now is 07:16 AM.