89 Lt250r won't shift past 3rd gear Help!
#1
#2
No it is not a common problem. It looks like you are going to have split your cases.
Buy the clymer manual it is fantastic for helping tear down the transmission. I have never split the cases on a motor before but had to do it this winter due to a bad bearing some worn thrust washers. It was soooooooo easy. Recomendation, don't pull the flywheel just remove everything from the right (clutch) side case.
Just tear it down, you will see the problem.
Buy the clymer manual it is fantastic for helping tear down the transmission. I have never split the cases on a motor before but had to do it this winter due to a bad bearing some worn thrust washers. It was soooooooo easy. Recomendation, don't pull the flywheel just remove everything from the right (clutch) side case.
Just tear it down, you will see the problem.
#3
Sounds like a bent shift fork or something.
If you tackle this one by yourself... GET THE PROPER TOOLS AND A MANUAL!
Don't pry the cases apart with a screwdriver...
You'll kick yourself when you realize all the things that you will damage trying to get the case halves apart..
Unless you feel extremely confident in your abilities... get some help or someone to do it for you..
Good luck
If you tackle this one by yourself... GET THE PROPER TOOLS AND A MANUAL!
Don't pry the cases apart with a screwdriver...
You'll kick yourself when you realize all the things that you will damage trying to get the case halves apart..
Unless you feel extremely confident in your abilities... get some help or someone to do it for you..
Good luck
#4
Thread
Thread Starter
Forum
Replies
Last Post
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)