06 Suzuki eigar 400 snorkle
#1
06 Suzuki eigar 400 snorkle
Hey all you eigar guys. Need help. I snorkeld my 06 eigar. simple 1.5" PVC and now need to jet it properly. I've read most who have done this have gone to a 124 main jet and it works fine. I'm not having any luck I've tried all kinds of different things now. The closest set up was stock pilot, 125 main and stock needle setting. This gave the bike lots of mid range power but was a touch sluggish on the bottom end it would hesitate a bit at the bottom but when it kicked in it would throw me right back. I then went to a 126 main and adjusted the needle up quite a bit about 1/4 inch there is no adjustment clips on this crab so I'm using small washers this gave me good top end but not as much punch as I got from the 125 main and seems kinda dull through out. Any help? Anyone tried this mod themselves I'd love to hear form you thanks.
Thread
Thread Starter
Forum
Replies
Last Post
ATVC Correspondent
Classifieds, Garage Sale & Swap Shop
0
09-01-2015 11:59 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)