Suzuki Discussions about Suzuki ATVs.

new guy needs help with quad master backfiring

Thread Tools
 
Search this Thread
 
  #1  
Old 08-15-2010, 06:36 PM
hydaftl's Avatar
Weekend Warrior
Thread Starter
Join Date: Aug 2010
Posts: 3
Likes: 0
Received 0 Likes on 0 Posts
Default new guy needs help with quad master backfiring

hello and thanks for reading.
i have just recieved a 2000 suzuki quad master 500 it has 1200 miles on it and it needs help. first off the reason i got it for cheap is that the starter reduction gears broke the block where they mount so it has to be pull started. after getting it home i made sure all the metal peaces were removed from inside the stator cover. then i put it all together and started it up. it will idle but if i rev it up it will stumble and back fire real bad. i have cleaned the spark plug and the carb and the air filter. it looks like the cdi box has been replaced i can see butt conectors and bare wire( somebody did a bad job). could this be a timming issue? how do i check time?. any help would be great and no i dont have any manual.
 
  #2  
Old 08-20-2010, 12:24 AM
hydaftl's Avatar
Weekend Warrior
Thread Starter
Join Date: Aug 2010
Posts: 3
Likes: 0
Received 0 Likes on 0 Posts
Default

wow 57 veiws and no help for a new guy. anyway i found the answer from a local atv guy. it was a low battery. runs great now
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
GregM
Polaris Ask an Expert! In fond memory of Old Polaris Tech.
7
03-06-2018 06:53 AM
Sandman2.0
Polaris
9
07-21-2015 09:03 AM
MATT BOOTH
Technical and How-To Articles
0
07-20-2015 07:38 PM
MATT BOOTH
Utility ATVs
0
07-20-2015 05:55 PM
blpersinger
General Chat
0
07-15-2015 09:56 PM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 


Quick Reply: new guy needs help with quad master backfiring



All times are GMT -5. The time now is 07:14 AM.