Part Identification Help - ATVConnection.com ATV Enthusiast Community

onasport400 · #1 (**permalink**) 10-22-2009, 09:04 PM

Hello I was wondering if anybody knows what this part is and where it goes:

This is on a Polaris Sport 400L.

Thanks, Jimmy

old polaris tech · #2 (**permalink**) 10-22-2009, 09:07 PM

one way drain/overflow tube that goes to float bowl.

onasport400 · #3 (**permalink**) 10-22-2009, 09:28 PM

And comes from where?

stendori · #4 (**permalink**) 10-23-2009, 06:17 AM

comes from the carb.

onasport400 · #5 (**permalink**) 10-23-2009, 11:55 AM

Isn't the float bowl part of the carb?

02magnum500 · #6 (**permalink**) 10-23-2009, 12:05 PM

Yes, should go on the nipple on the bottom of the float bowl as an overflow vent line.

onasport400 · #7 (**permalink**) 10-23-2009, 12:12 PM

Quote:

Originally Posted by 02magnum500

Yes, should go on the nipple on the bottom of the float bowl as an overflow vent line.

Thank you, that's what I was looking for!

02magnum500 · #8 (**permalink**) 10-23-2009, 12:13 PM

I use some superglue to hold the tube in place on the nipple.

onasport400 · #9 (**permalink**) 10-23-2009, 12:15 PM

OK. And does the other end just hang?

02magnum500 · #10 (**permalink**) 10-23-2009, 12:20 PM

Yep, run the other end through along side the engine and down below the frame (should hang down when you look under your ATV), this just gets the drip or 2 of gas off your frame. then the gas will drip on the ground not your ATV.