scrambler 400 pipe
#1
#3
Quad Patrol
Don't let the hp numbers fool you. Its all in how you get it to the ground. Clutching clutching clutching!
Don't let the hp numbers fool you. Its all in how you get it to the ground. Clutching clutching clutching!
scrambler 400 pipe
Depending on WHERE in your power range you want the best power there are a few good choices.But you have to remember you have to tune your clutch to the rpm range of the pipe.
If you are wanting more lowend/midrange the best two out there are the Dynoport pipe which works with stock clutching(www.dynoport.com) and the Aaen Torquer but it will need a clutch spring change a green Aaen primary spring and a blue Aaen secondary spring wll get it done.(www.aaenperformance.com).
If you want more mid/topend you have the Aaen topend pipe,HPD (call Rick Ritter on this pipe and setup),HSP and for info on this one drop "speedwerx" a pm on here.
If you are wanting more lowend/midrange the best two out there are the Dynoport pipe which works with stock clutching(www.dynoport.com) and the Aaen Torquer but it will need a clutch spring change a green Aaen primary spring and a blue Aaen secondary spring wll get it done.(www.aaenperformance.com).
If you want more mid/topend you have the Aaen topend pipe,HPD (call Rick Ritter on this pipe and setup),HSP and for info on this one drop "speedwerx" a pm on here.
#4
Quad Patrol
Don't let the hp numbers fool you. Its all in how you get it to the ground. Clutching clutching clutching!
Don't let the hp numbers fool you. Its all in how you get it to the ground. Clutching clutching clutching!
#5
#6
Quad Patrol
Don't let the hp numbers fool you. Its all in how you get it to the ground. Clutching clutching clutching!
Don't let the hp numbers fool you. Its all in how you get it to the ground. Clutching clutching clutching!
scrambler 400 pipe
Originally posted by: RealAce
about how much will RCR stage 1 kit run me or the Dynoport because i want to keep my stock clutch kit in and have u heard ne thing good or bad about a fmf gnarly pipe with a fmf turbine core 2
about how much will RCR stage 1 kit run me or the Dynoport because i want to keep my stock clutch kit in and have u heard ne thing good or bad about a fmf gnarly pipe with a fmf turbine core 2
#7
scrambler 400 pipe
when i first bought my 400 i added a fmf pipe and silencer with stock clutching,my brother has the dynoport pipe and silencer with stock clutching.the fmf pipe actually had more bottom end with stock clutching vs. the dynoport with stock clutching,id take him off the line and pull a bike length ahead and then he would gain a half length in the midrange and thats how the race finished.i added a hpd trail pipe and clutching shortly after and both the other pipes seem stock compared to it.i say stay away from the fmf and the dynoport and get either a hpd pipe or the rcr kit..
Trending Topics
#8
Quad Patrol
Don't let the hp numbers fool you. Its all in how you get it to the ground. Clutching clutching clutching!
Don't let the hp numbers fool you. Its all in how you get it to the ground. Clutching clutching clutching!
#9
scrambler 400 pipe
Realace, checkout our web-site www.hotseatperformance.com our pipe is 277.00 and the clutch kit is 189.00 form the reports we get form our customers you will want to stay away from fmf, & dynoport pipes for the 400 polaris for sure. Our pie kit comes with proper jetting and installation instructions as well. If you wna tpm me or giv eus a call 651-982-0600
#10
Quad Patrol
Don't let the hp numbers fool you. Its all in how you get it to the ground. Clutching clutching clutching!
Don't let the hp numbers fool you. Its all in how you get it to the ground. Clutching clutching clutching!