Sportsman brake change
#1
Sportsman brake change
I changed the pads on the front of my 05 Sportsman 400 today. Everything went smooth yet one question; How tight are you supposed to screw in the backside plug on the pin that holds in the pads?
I screwed it in just enough to secure up the outer pad. That seemed to work. How far in is just right? Nothing on youtube seemed to address this?
thanks.
Doug
I screwed it in just enough to secure up the outer pad. That seemed to work. How far in is just right? Nothing on youtube seemed to address this?
thanks.
Doug
#2
With master cylinder pumped up and calipers bled, just have the wheel off the hub. Turn the hub slowly as you tighten the set screw until you feel a slight resistance from the caliper pad. Then back of 1/8 turn. This helps set the primary braking pad along with aligning the caliper mount bracket to the rotor.Dirt Cheap Yamaha, Honda, Arctic Cat & Polaris OEM Parts & Accessories – Cycle Parts Warehouse
Thread
Thread Starter
Forum
Replies
Last Post
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)