Go Back   ATVConnection.com ATV Enthusiast Community » General Discussion » Performance Mods and Project Quads
Sign in using an external account
Register Forgot Password?
Register ATV Photos FAQ Members Calendar Search Today's Posts Mark Forums Read GarageVendors
Search
Welcome to ATVConnection.com ATV Enthusiast Community

Reply Share this with your friends
  #1 (permalink)  
Old 03-19-2013, 09:00 PM
Weekend Warrior
Garage is empty, add now
 
Join Date: Mar 2013
Location: Stuart, Florida
Posts: 1
killintime_ry
Default Winch test without a switch or relay??

New to the site first post so hopefully someone can help. So I have this old winch mounted on my Big Bear, its got 2 wires coming out of it, best I can figure out 1 ground and 1 power which would then go to a relay (I cant find a free spool lever/button/clip). Anyone have any ideas on how I can test it in both directions (reversing the polarity which would normaly be done at the relay so it will spin the opposite way) or at least one direction. Im hesitant to spend $50-60 on eBay for a relay and switch just to test it out and see if it works, and then have a big headache trying to return a open used electrical item. Thanks
Reply With Quote
  #2 (permalink)  
Old 03-19-2013, 10:55 PM
Range Rover
Garage is empty, add now
 
Join Date: May 2011
Location: Hammond WI
Posts: 160
Default

There isn't a ground or positve on a winch motor. They can both be hot, that is what makes it turn both ways. To test the motor to see if it turns, take a set of jumper cables and hook them to a battery. Hook the ground wire of the jumper cables to one of the winch terminals. Then touch the hot wire of the jumper cables to the other terminal, the winch motor should turn. Switch the wires around on the winch motor and it should spin the other way.
Reply With Quote
  #3 (permalink)  
Old 03-19-2013, 10:58 PM
jumbofrank's Avatar
Elite Pro Rider
Garage is empty, add now
 
Join Date: May 2008
Location: Michigan
Posts: 5,420
Default

I have an old winch lying around that I wanted to check if it still works. I hooked jumper cables directly from the battery to the winch and it started spooling out. I switched the cables around and it spooled back in. I don't know if this will work for you or not.

ETA: I type too slow. Tony got there first.
__________________
2008 Sportsman 500 EFI.
Polaris winch, 52" Glacier plow,
front brush guard, rear bumper
Reply With Quote
Old 03-19-2013, 10:58 PM
Reply Share this with your friends

Tags
aee, atv, check, figure, jumpers, motor, relay, relays, switch, test, turn, twst, winch, wire, works



Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On