Performance Mods and Project Quads Share and ask for information about modifying your ATV or building project quads.

basic mods to a yzf 450

  #1  
Old 02-01-2005, 06:54 AM
Hidef's Avatar
Weekend Warrior
Thread Starter
Join Date: Jan 2005
Posts: 17
Likes: 0
Received 0 Likes on 0 Posts
Default basic mods to a yzf 450

hi all,

got a lot of help in choosing my quad(thanks), and almost 99% sure i am going for yzf450. i would like to know what are the very first mods you would do. full exhaust, filter , tyres etc keeping reliability in mind, and the fact it will probably be used for more than one purpose(trail/dunes etc). not sure if my height (6ft) or weight( 200lbs) matters.
 
  #2  
Old 02-01-2005, 05:20 PM
TBONE31's Avatar
Pro Rider
Join Date: Jul 2004
Posts: 208
Likes: 0
Received 0 Likes on 0 Posts
Default basic mods to a yzf 450

well i would first put on exhaust then get like the ATV PRO PERFORMANCE PACK because that gives everything you will need for air flow. And if you want more speed get it ported and polished.
 
  #3  
Old 02-01-2005, 10:14 PM
86LT250RFatty's Avatar
Pro Rider
Join Date: May 2004
Posts: 2,689
Likes: 0
Received 0 Likes on 0 Posts
Default basic mods to a yzf 450

dont open up the engine yet, Get a Full Exhaust, Pro-Flow With filter of your choice (foam or K&N), then take lid off, get a GYT-R Jet kit (found to be better then Dynojet) Then, get (4) HoleShot XCR Tires to make it handle a little better and hook up all the power. that should be more then enough for a while..
 
  #4  
Old 02-01-2005, 10:19 PM
drgnerth's Avatar
Pro Rider
Join Date: Jan 2005
Posts: 245
Likes: 0
Received 0 Likes on 0 Posts
Default basic mods to a yzf 450

Do the cam mod (retard the exhaust cam one tooth).
 
  #5  
Old 02-02-2005, 12:44 AM
blindside350's Avatar
Pro Rider
Join Date: Jul 2003
Posts: 1,287
Likes: 0
Received 0 Likes on 0 Posts
Default basic mods to a yzf 450

Unless you your getting an first mod you should do is the Deco plug. My friends YZ450F blew up that way and it cost him 2 grand to fix it! Its cheap insurance only $20! But my YZ450F friend made a plug out of silicon and its holding up really good!
First mods IMO:
Pipe (fullsystem or slipon Yoshi, DRD HMF)
Airfilter ( Uni would probably be better for you
Tires (Holeshots, Klaws and Sandstars for dunes [img]i/expressions/face-icon-small-smile.gif[/img])
And you should be set for now!
 
  #6  
Old 02-02-2005, 12:52 AM
Hidef's Avatar
Weekend Warrior
Thread Starter
Join Date: Jan 2005
Posts: 17
Likes: 0
Received 0 Likes on 0 Posts
Default basic mods to a yzf 450

thanks again.

i will stick with the basic mods for now.
exhaust
filter
deco plug
and range of tyres.

if i decide on the raptor, i will add spacers first and the same mods as above.
 
  #7  
Old 02-02-2005, 06:02 AM
2fun's Avatar
Pro Rider
Join Date: Nov 2001
Posts: 1,631
Likes: 0
Received 0 Likes on 0 Posts
Default basic mods to a yzf 450

You are going to get a lot of replies no doubt.
From a guy who has gone there and done that, here is my input.
1) If it is older than an 05', get the decompression plug.
2) Break in the motor using the Motoman method Break-in secrets
3) Remove the airbox lid
4) Slap a DR. D exhaust on that bad boy
5) Rejet (45 pilot, stock needle on the 5th clip position, 172 main) That will get you pretty close.
6) Ride and enjoy![img]i/expressions/face-icon-small-happy.gif[/img]
 
  #8  
Old 02-02-2005, 11:07 AM
maddog56's Avatar
Elite Pro Rider
Join Date: Sep 2002
Posts: 9,380
Likes: 0
Received 1 Like on 1 Post
Default basic mods to a yzf 450

Originally posted by: blindside350
Unless you your getting an first mod you should do is the Deco plug. My friends YZ450F blew up that way and it cost him 2 grand to fix it! Its cheap insurance only $20! But my YZ450F friend made a plug out of silicon and its holding up really good!
YFZ450, The YZ450F and YZF450 are names for the dirt bike.
 
  #9  
Old 02-08-2005, 01:41 AM
Hidef's Avatar
Weekend Warrior
Thread Starter
Join Date: Jan 2005
Posts: 17
Likes: 0
Received 0 Likes on 0 Posts
Default basic mods to a yzf 450

thanks,

should be receiving it this week, i have requested:

gtyr exhaust
silencer
filter
open airbox
gtyr jet kit
spacers rear
kill switch
skid plates

i will be getting the 4 x holeshot xcr tyres as well.

cant wait[img]i/expressions/face-icon-small-smile.gif[/img]

what is the best fuel to use? as well as oil?

2fun, i read the breakin secrets, so basically i warm her up on the weekend. then open her up hard in 2nd 3rd and 4th gear as well as shutting off hard as well for around 20miles(not sure how i am going to measure that) then she should be done? just checking, dont want to get this wrong,lol
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Customer Service #1
Arctic Cat
73
05-15-2020 08:46 AM
ATVC Correspondent
Classifieds, Garage Sale & Swap Shop
0
09-23-2015 06:23 AM
PrairieDog126
Polaris
5
09-16-2015 01:33 PM
1ArmBandit
Polaris
0
09-08-2015 08:59 PM
JakeXBL
General Chat
8
09-05-2015 01:08 PM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 

Thread Tools
Search this Thread
Quick Reply: basic mods to a yzf 450



All times are GMT -5. The time now is 08:49 PM.