Hi folks,
I have a 2006 rancher at 400. Had an esp code blinking 6 times I reset the position angle sensor and cleaned and greased all the conectors. Now I have a error code blink 12 now. Any comments would be great.

Thanks,
Fishands

0 blinks: No problem
1 blink: ECU
2 blinks: ES Shift up / down shift system or shift release / related wire harness or ECU
3 blinks: Angle sensor
4 blinks: Gear position switch system
5 blinks: ECU motor driver
6 blinks: ECU fail-safe relay circuit
7 blinks: ECU Voltage convert circuit
8 blinks: Angle Sensor control motor
9 blinks: Angle Sensor short or related wire
10 blinks: Ignition pulse generator
11 blinks: Speed sensor
12 blinks: Gear position switch

its probably your gear switch but i posted the rest of the codes in case you have any more problems. i think all these problems people have with ES should tell honda something

-------------------------

07' Honda Foreman ES
26"Maxxis BigHorns on ITP SS108's
WARN XT30 with synthetic rope
03' ford F-250 Powerstroke diesel
06' fleetwood terry 32' 5thwheel

Edited: 05/09/2008 at 03:51 PM by cody_lyons78

The TRX400FG/FA Hondamatic codes are ...

==============================================================================================================================


==============================================================================================================================



This is the tests for code #12 ...


==============================================================================================================================