I just recently bought a 2002 Cannondale Cannibal.. It ride great but the only problem is when i stop the bike stalks, Any suggestions? DO you think if i turn the idle up a little more it will fix that problem..

..If idleing to low is the problem then that will if it. Do you know what its idleing at? go to cannondaleriders.com for more info

-------------------------
Cannon Speed

could this problem be attributed to the brake booster? are fluid levels for the brakes all adequate?

-------------------------
1998 Polaris 400L Sport
Wiseco piston +.020
Cylinder bored .020
K&N filter and jetted
Rick Ritter silencer
Hot Seat pipe
Hot Seat graphics
Hot Seat Performance Clutch Parts
Orange Prim, White Sec, 45/40 Helix, 53.3 Gram I-15 weights
Primary Drive 12/42 Sprockets

2008 Yamaha Grizzly 700 EFI (Ducks Unlimited Edition)
Warn Winch
2005 Honda Foreman 500

Does it idle after you start it or when it is just sitting there when you dont give it any gas? P.S. i had a cannondale cannibal and they are high performance and high maintanance. Unless you are planning on dumping your life savings into it I would suggest selling it.

19Dan1988,

In several of your responses you have suggested selling it or spending your life savings. How about learning about the quad and doing a little Preventitive Maintance, your cost will go down accordingly. This would of course apply to ANY manufactures quad.

Now to the question, the motor should Idle around 2,000 rpm. You might also check to make sure your clutch is properly adjusted.

Smitty

-------------------------
2002 Cannondale Speed
Trinity Port and Polished Head and Mapping HMF Slip on and AC Nerfs, Falicon stroker

www.gamers-care.org Video game tournaments for charity's.

If you have to ask "Who's the man?" your probably not him.