04/28/2008 03:03 PM
|
jusrlax
Range Rover
Posts: 158
Joined: 10/06/2003
|
My garage could use a vented gas cap.
-------------------------
Can-Am ATV-Because fat guys like to have fun too
|
|
|
|
04/28/2008 03:16 PM
|
drbalazo
Trailblazer
Posts: 61
Joined: 07/14/2007
|
My garage has:
-Stock steering stem
-Stock A-arms
-Stock tie rods
-Stock Exhaust pipe
-Stock axle (no hubs, just plain axle)
-Stock front shocks
-New 15t front sprocket
-Stock gas tank
Edited: 04/28/2008 at 03:18 PM by drbalazo
|
|
|
|
04/28/2008 09:07 PM
|
flyinds
Pro Rider
Posts: 294
Joined: 08/05/2004
|
Originally posted by: flyinds
i got some ims foot pegs with the kickups{SOLD].STILL HAVE THE IMS heels gaurds been installed but not rode with, also a transmisson out of a 04 baja x.
a friend has some extremes 20x10x10 8 paddles with the little rubber stringers on the paddles on black labels douglas wheels, also some sandstar front tires on black label douglas wheels. them two sets on yamaha bolt patterns. THANKS
-------------------------
FLYINDS '04 DS650 BAJA X<BR>mr hp lectron 48hv,hpr lighten flywheel, hpr4 cams, hpr portingwith big valves, race port intake for 48hv, end cap, barnett 9-disc, hpr 40% clutch springs, magrua hydraulic clutch, horsepower it's an addiction 2007 2500hd duramax 4x4
|
|
|
|
04/29/2008 10:17 AM
|
McKay5858
Trailblazer
Posts: 59
Joined: 07/10/2007
|
my garage is lookin for some more jam, either some milder cams or a carb
-------------------------
2000 ds650-HMF slip on, JE 11.5 piston, dynojet kit, big gun cdi, barnett clutch, AC propeg nerfs
|
|
|
|
04/29/2008 12:26 PM
|
DragonDJ11
Pro Rider
Posts: 2297
Joined: 07/02/2005
|
Originally posted by: DragonDJ11
This stuff is just collecting dust in the garage...
Full RWR Exhaust with both the open end, and supertrap end. It is used and has some rust on it. A good sandblast and powder coat would have her perfect. And a couple dings here and there.
HPR Lectron 48 with a 1-5 needle in it. Cable and RWR ported intake also sitting around in the way....
TTT
-------------------------
05 DS650X<BR>Slower then some, faster then others!!!<BR> <BR>Nightmares about my bike eating doller signs like Pac-Man...I don't think it will ever end. Power hungry
|
|
|
|
04/30/2008 12:35 PM
|
jusrlax
Range Rover
Posts: 158
Joined: 10/06/2003
|
My garage has two sets of black front fenders with brackets.
My garage has a set of nerf bars from an 04 Baja X.
My garage could use a vented gas cap, one from a Polaris Predator would even work.
-------------------------
Can-Am ATV-Because fat guys like to have fun too
|
|
|
|
04/30/2008 08:28 PM
|
tombomb
Trailblazer
Posts: 86
Joined: 10/31/2003
|
Deleted.
-------------------------
2001 Honda EX
2002 DS 650 rolling chassis ( under remodel )
2005 Honda TRX 90
2006 Polaris Sportsman 500
Allways leave your campsite cleaner than you found it.
Edited: 05/06/2008 at 06:14 AM by tombomb
|
|
|
|
05/01/2008 07:44 PM
|
Psycho-Son
Weekend Warrior
Posts: 9
Joined: 04/26/2008
|
Sure would Like to see 4 yamaha pattern hubs with an 03' DS 650 spline pattern in my garrage.
-------------------------
720 bomber!!!!!
|
|
|
|
05/03/2008 12:19 PM
|
|
|
In need of a old used up 530 chain or two. Will not be used on a bike just need it for mock up of the Busa. Just need a piece of crap that is taking up space and would just cost you money to throw out. Thanks 
-------------------------
2005 DS1300 Hayabusa power baby 2004 YZ450F my dirt machine 2006 Raptor R1. Very nice ( The wifes ) 2003 WR450 Wifes dirt machine 1992 LT80 DG Pipe Cy's 2001 XR50 Cy's 2000 LT80 DG Pipe Nick's 2004 PW50 Want? Need? It's a fine line............
|
|
|
|
05/03/2008 04:10 PM
|
Entomber
Pro Rider
Posts: 1464
Joined: 04/09/2003
|
- Frame
- Coils
- Wiring Harness with a splice on one of the fuses
- Silver/Grey Rear Laker Plastic (Must go...)
All needs to move out
-------------------------
2000 DS 650 - Stage III (Blown Motor, new build in progress) <BR>2001 Raptor 12:1 JE High Comp Piston, Yoshimura Comp Exhaust, Stage I Hot Cam<BR>2000 T-Rex - Ported Cylinder, Head, Exhaust, Clutch, Transkit, 28MM Carb, head and intake manifold.
|
|
|
|
05/04/2008 10:58 PM
|
NickDS650
Pro Rider
Posts: 741
Joined: 09/06/2004
|
KMS EFI with Big Gun Evo X exhaust
RWR CDI box
PWR Radiator
AC blackline pro pegs (black and orange)
CT radiator shrouds (powdercoat orange)
IMS heel guards
AC regular nerf bars
Stock nerf bars from '04 X
Stock parts from '03 part out still goin on
-------------------------
~ Woehrle Racing
'02 Baja
Powdercoated Black and Orange, KMS Fuel Injection, Big Gun Evo X Exhaust, RWR CDI and Ported Intake, PWR Radiator, Barnett Carbon Fiber Clutch, EHS Lid, RK X-Ring Chain, AC Blackline Pro Pegs, etc.
'05 Sportsman 500 H.O. L.E.
'04 Baja X
HMF Slip On, K&N, Powdercoat coming soon...
'06 Honda CBR600 F4i
Two Brothers Carbon Fiber M5 Exhaust, K&N, Powdercoat, CBR Engraved Guards, Metzeler Tires
|
|
|
|
05/06/2008 06:54 PM
|
flux
Range Rover
Posts: 150
Joined: 05/12/2006
Supporting Member
|
in my garage i have.......
stock front shocks...
stock cyl........
stock carb.......
stock CDI.........
stock exhaust can.......
stock hand guards....
stock piston.....
all from a 06 DS 650X.............
MAKE ME AN OFFER........................
THIS STUFF HAS TO GO!!!!
could even make a good package deal......
any reasionable offer will fly.....
-------------------------
HPR/OMR 800.........
with all the goodies...............
ROTAX ROCKS...........
|
|
|
|
05/06/2008 09:53 PM
|
MrMeaner
Pro Rider
Posts: 2490
Joined: 04/28/2003
|
have some stuff taking up space
1. Front KFX shocks like new white springs
2. DS wheelie bar used twice
3. DS 2005 red rear shock taken off new quad
3. DS tailight with polished stainless cover with DS650 cut out
4. DS stainless battery cover
-------------------------
2005 Reptile DS
2002 Pami 760 DS
2003 LT80
2005 KFX80
|
|
|
|
05/06/2008 10:36 PM
|
AZSAND
Pro Rider
Posts: 4152
Joined: 12/03/2001
|
Do you have pics of the wheelie bar and whats the length and weight of it.PLEASE
Yocabet@aol.com
-------------------------
1.TVI turbo 800 nitrous bike.with over 86 4.2 passes on the toughest track in the country.and some that will make you spit up.Same motor 31 months and counting.
1.TVI 800 nitrous bike still earning its strips
2.Pami stock bore nitrous full duners one @5.0 and one @4.8 on u4.
|
|
|
|
05/07/2008 10:15 AM
|
pipelayer
Pro Rider
Posts: 244
Joined: 08/14/2006
|
Yea what AZ said you can email a pic to bsmplumb@aol.com thanks meaner
-------------------------
02 ds730 w/HPR5cams 2- 40mm lectrons RWR pipe and a little more, just a dune bike with some bump 01yz 250 for the mx track
|
|
|
|
05/09/2008 12:18 AM
|
aceisback
Pro Rider
Posts: 1152
Joined: 05/22/2005
|
Might any of you who also own a Kawasaki and have put the LED taillight on have the stocker laying around in your way??? Let a neighbor borrow the wife's 04 KFX 700 to go catch some thieves and when he returned the entire taillight assembly was crushed/shattered, as was the back window of his truck!
He did locate said criminals and notified the Sheriffs department but jacked up the ol' lady's bike in the process. He has offered to help fix the damage so I don't really want to stick him with new part/dealer prices. Especially since he has to buy his own rear window.
Can ya help a brother out?
-------------------------
If you can read this, thank a Teacher. If you can read it in English, thank a Marine.
|
|
|
|
05/10/2008 07:07 AM
|
cpaul
Pro Rider
Posts: 320
Joined: 11/12/2004
|
My DS needs a new home........hate to say it, but it is time to move over to the utility side. Would be interested in partial swapping for a 2 up. As you know my DS 650 has been tweaked by Jeff Ross. Full stage one kit ++. Woods rev eliinator, heavy duty woods clutch springs, clutch must have less than 100 miles on it. flamed paint on nose cone,, works shocks, all the billet goodies i could add.......you name it> Also have tons of extra parts (mostly stock) inclusing a tm 42 that needs to fins new home. If interested email me at cpaul@ssg.petsmart.com as I am seldom on the site anymore. Thanks!
-------------------------
"If only I was as fast as I think I am!"
Looking for any polished/billet items and a few more MPH!
2000 Badger 80 for sale......
|
|
|
|
05/10/2008 11:03 AM
|
jsimonh
Trailblazer
Posts: 66
Joined: 10/26/2005
|
My garage could use some front rims for my ds.
-------------------------
'00 DS650 Stage 2
Edited: 05/10/2008 at 11:45 AM by jsimonh
|
|
|
|
05/11/2008 03:03 PM
|
Psycho-Son
Weekend Warrior
Posts: 9
Joined: 04/26/2008
|
i'm lookin for a lightened sub-frame for a bomber DS650.
or any other tips that will lighten my pig up lol
-------------------------
720 bomber!!!!!
|
|
|
|
05/11/2008 03:10 PM
|
Psycho-Son
Weekend Warrior
Posts: 9
Joined: 04/26/2008
|
hey, i'm also in need of some solid struts for the drags.
-------------------------
720 bomber!!!!!
|
|
|
|
05/11/2008 03:55 PM
|
Psycho-Son
Weekend Warrior
Posts: 9
Joined: 04/26/2008
|
Does anybody have any pics of struts??? my dad and i are wanting to build some ourselves.
what kind of steel? like tubing?
what kind of hiem joints?
and i'm in need of a LIGHTENED FRAME for the bomber.
does anybody have a light stretched frame they wanna get rid of?
-------------------------
720 bomber!!!!!
|
|
|
Search Topic
