I've tried adding pics on my bio page and it will not work. I add them from a cd in the drive, the upload and it says they will be checked by a moderator and be up in 2 hours or so. 2 Days and nothin!!
What am I doing wrong? Any help would be good.

-------------------------
2003 TRAILBLAZER 400

HPD Trail Pipe, MT Muffler,
K and N Filter, V Force Reed,
Billet Spacer, 38mm TMX
Carb, Hyper Shift Clutch Kit,
ATI Grips And FLY HandelBar,
HSP Aluminum Grab Bar And
Oil Block Off Kit, SideWinder
Chain And Sprockets, C Series
Aluminum Rims, DG Bumper,
Mud Lite XL Tires And Various
Other Accessories.

On your my page, you do see your pictures after you have uploaded them and have posted bio?

Nope Blank

-------------------------
2003 TRAILBLAZER 400

HPD Trail Pipe, MT Muffler,
K and N Filter, V Force Reed,
Billet Spacer, 38mm TMX
Carb, Hyper Shift Clutch Kit,
ATI Grips And FLY HandelBar,
HSP Aluminum Grab Bar And
Oil Block Off Kit, SideWinder
Chain And Sprockets, C Series
Aluminum Rims, DG Bumper,
Mud Lite XL Tires And Various
Other Accessories.

Your doing something wrong on your end because I just approved 5 photo pages.

Most of the time its the format or photo size that is the problem.

Browse to the photo (jpg or gif formats only) on your PC.
Click the "Submit Photo" button.
Photo dimensions are limited to 750 wide by 750 high.
Photo file size is limited to 150K or less.
Thumbnail is automatically created from your photo.

Ill try again but the pics are larger than the size. Should it not automatically correct size it and then you can see the accual size when you click and enlarge it?

-------------------------
2003 TRAILBLAZER 400

HPD Trail Pipe, MT Muffler,
K and N Filter, V Force Reed,
Billet Spacer, 38mm TMX
Carb, Hyper Shift Clutch Kit,
ATI Grips And FLY HandelBar,
HSP Aluminum Grab Bar And
Oil Block Off Kit, SideWinder
Chain And Sprockets, C Series
Aluminum Rims, DG Bumper,
Mud Lite XL Tires And Various
Other Accessories.

It will need to be below the limit.

Yeah it says that the size exceds 150K. How do I make it smaller while using the same picture?

-------------------------
2003 TRAILBLAZER 400

HPD Trail Pipe, MT Muffler,
K and N Filter, V Force Reed,
Billet Spacer, 38mm TMX
Carb, Hyper Shift Clutch Kit,
ATI Grips And FLY HandelBar,
HSP Aluminum Grab Bar And
Oil Block Off Kit, SideWinder
Chain And Sprockets, C Series
Aluminum Rims, DG Bumper,
Mud Lite XL Tires And Various
Other Accessories.

TO GET PICTURES SMALLER

1 open microsoft paint
2 open your picture up on microsoft paint
3 click on sketch/skew
4 size it down horizontal/vertical to where you dont have to scroll to see the entire picture, i ussually start downsizing with about 60% on both hor. and vert.
5 save it to your desktop or somewhere easy to get to.
6 come to the site and open them up to your pics page.

Thanx for all your help it worked!!!

-------------------------
2003 TRAILBLAZER 400

HPD Trail Pipe, MT Muffler,
K and N Filter, V Force Reed,
Billet Spacer, 38mm TMX
Carb, Hyper Shift Clutch Kit,
ATI Grips And FLY HandelBar,
HSP Aluminum Grab Bar And
Oil Block Off Kit, SideWinder
Chain And Sprockets, C Series
Aluminum Rims, DG Bumper,
Mud Lite XL Tires And Various
Other Accessories.

The server should send the photo page for approval after its next recycle.

Your photos have arrived and approved.

When I "stretch skew" my pics down to size, the look smaller but the KB size stays the same. I saved them all then tried to post. It seems that one was ok, but the rest arent. I dont think i did anything different. Im gettin a headache

-------------------------
245lb 400 Scrambler on alky. chromoly frame, rigid front & rear suspension, 50 over wiesco, 15.5 cool head, Ritter race ported, 44mm Lectron, HPD ignition, CPI intake, ported v-force reeds, race clutch- 6k stall, lightned flywheel, CPI outframe drag pipe
+8 swingarm, AZ Bad Boys torque plate. cut seat, race cut fenders, aluminum fuel tank alum axle, Reverse gear removed.

98 Scrammy 400 4x4, mods, w/ Gators..."Rusted"

Dirts for racing... asphalts for gettin' there

BUMP?

-------------------------
245lb 400 Scrambler on alky. chromoly frame, rigid front & rear suspension, 50 over wiesco, 15.5 cool head, Ritter race ported, 44mm Lectron, HPD ignition, CPI intake, ported v-force reeds, race clutch- 6k stall, lightned flywheel, CPI outframe drag pipe
+8 swingarm, AZ Bad Boys torque plate. cut seat, race cut fenders, aluminum fuel tank alum axle, Reverse gear removed.

98 Scrammy 400 4x4, mods, w/ Gators..."Rusted"

Dirts for racing... asphalts for gettin' there

I've repeatily tried to post more pics on my page with NO success. they are well below size and still won't work...whats going on. I"ve been trying for weeks

-------------------------
Petroleus Burnus Maximus
03' Prairie 650
Twin Air
DynaFS
MuffMod
Carlisle Belt
Dalton P/W Drive, P/PL
Hardline Tach
Garmin Etrax GPS
Warn2000
25" Maxxis Big Horn Radial on Maxxis Max Lite 8 Spoke Cast
Moose guards
Custom Diamond Plates
Custom Coolant temp gauge

(jpg or gif formats only)

Photo dimensions are limited to 750 wide by 750 high.

Photo file size is limited to 150K or less.

___________________________

I see you have some photos up so compare the numbers and file types to those and see what is different.

Quote

---

Originally posted by: Scrammy400
I've tried adding pics on my bio page and it will not work. I add them from a cd in the drive, the upload and it says they will be checked by a moderator and be up in 2 hours or so. 2 Days and nothin!!
What am I doing wrong? Any help would be good.

---

you got it ,,,,nice pics

-------------------------
just a typical white person

One last thing when you post bio it takes on average of about 30 minutes to cycle through the server and then emails are sent out to the moderators. Next a moderator must read his email and then back to the ATV Connection forums to look at your page and check for content. So what I am saying is if a moderator is not online it could be longer than the thirty minutes so please be patient.

ok thanks for all the help

-------------------------
03 polaris predator
blacked out
bitchen stichin seat cover
LTE twins
K&N off carb
13 tooth front
radiator shrouds
tether
chrome light covers
shock covers
170 main jet clip on 4
50 pilot
chrome bottle cover
AC propegs w/heelguards
more too come

illl get some pics up soon

-------------------------
05' Troy Lee Predator 500
-Pure Polaris Front Bumper
-Pro Armor Nerf Bars
-White Bros. Full System Exhaust

05' Suzuki Eiger Auto 4x4
-HMF Slip On Exhaust w/ stage 1 jetting
-ITP Mudlites
-Front & Back DG Bumpers
-K & N Filter

03' TTR-125 Dirt Bike
-Troy Lee Design Graphics w/ Seat Cover
-K&N Filter
-New Handlebars And Shocks

I do that procedure and I can get the KB down, but the dimensions stay at 784 by 588...

-------------------------
2004 DS 650 X
TM45 on alky, Full head porting, ported intake, port matched to head, 13:1 comp piston, NOS fogger system, Custom powdercoat, 22" razr2's, 21"razr2's on front, 16/40 gearing, 1 1/4" custom extended steering stem, ASR upper a-arms
****Clutch blown apart, Crank siezed in case, Rod siezed in crank, One expensive lawn orniment.

Quote

---

Originally posted by: TheChosenOne
I do that procedure and I can get the KB down, but the dimensions stay at 784 by 588...

---

hey man... get on MSN and send me your pcis... ill resize them...

-------------------------
H.O.N.D.A. How Odd.. No Damn Acceleration
1996 Yamaha Banshee-billet bearing carrier, +5 timing, milled head, lightened flywheel, Toomey T-4,100LL 40:1 amsoil dominator,
2003 Yamaha Warrior- HMF Slipon, Full Raptor suspension in under $50, Kenda Klaws, AC Racing bumper, UM skid
Landscaping is just another excuse for men to garden.
if you need help im me or something MSN:speedy2222@gmail.com AIM: Spdy748 YAHOO:speedy_fast2003