05/09/2008 08:58 AM
|
Wild Bill
Weekend Warrior
Posts: 3
Joined: 05/09/2008
|
I have 2004 sportsman 4x4. How do I remove the right front axle from the differential? I have taken every bolt out of the diff and it does not seperate to remove the c clip. It seems the right and left axles are connected internally. When i pull on the right the left moves and stops the right from coming out.
Edited: 05/09/2008 at 10:32 AM by Wild Bill
|
|
|
|
05/09/2008 09:54 AM
|
MECHANIKE
Range Rover
Posts: 150
Joined: 12/25/2007
|
wildbill call service at the dealer, i have a scram 4x4+it takes arealhardtug to remove.fast,sudden+hard(thats what she said).
-------------------------
01 SCRAMBLER 500 4X4/#170 MAIN JET,JET NEEDLE RAISED 2,1-1/2"FRONT WHEEL SPACERS,POLARIS SPEEDO+LOW PROFILE SHIELD,KEVLAR DRIVE BELT,WIDER SWAMPLITES,BICYCLE HAND GRIPS,GIANT IGUANA NAMED "CHUCK"
|
|
|
|
05/09/2008 10:12 AM
|
Wild Bill
Weekend Warrior
Posts: 3
Joined: 05/09/2008
|
Are you saying don't attempt, it's too difficult. And just take it in to the dealer. I had a feeling looking at the clip on the replacement axle that that was the only way to remove.
|
|
|
|
05/09/2008 12:06 PM
|
MECHANIKE
Range Rover
Posts: 150
Joined: 12/25/2007
|
no what i'm saying is talk to service to see if its the same as mine,mine i ended up grabbing it with both hands+ put both feet on the machine+pulling hard+sharp like i'm pull starting a huey helicopter.does it have a circlip?which is a wire wrapped around a groove in the shaft.
-------------------------
01 SCRAMBLER 500 4X4/#170 MAIN JET,JET NEEDLE RAISED 2,1-1/2"FRONT WHEEL SPACERS,POLARIS SPEEDO+LOW PROFILE SHIELD,KEVLAR DRIVE BELT,WIDER SWAMPLITES,BICYCLE HAND GRIPS,GIANT IGUANA NAMED "CHUCK"
|
|
|
|
05/09/2008 12:26 PM
|
Wild Bill
Weekend Warrior
Posts: 3
Joined: 05/09/2008
|
yes it has the round (opposed to flat) clip on the shaft. I just spoke to service and he says the same . Twist it a little to find a point where it seems to be at its farestmost towards the outside and then give it a good yank and it should come out. And I better bolt that sucker back together before yanking on it like a wildman. Ehhh? And thanks "Mechanike" for responding to my situation. Safe riding to you.
Edited: 05/09/2008 at 12:59 PM by Wild Bill
|
|
|
|
05/09/2008 02:06 PM
|
MECHANIKE
Range Rover
Posts: 150
Joined: 12/25/2007
|
10/4 on boltin it back togather so you don't mess with the seals,anytime w.b.
-------------------------
01 SCRAMBLER 500 4X4/#170 MAIN JET,JET NEEDLE RAISED 2,1-1/2"FRONT WHEEL SPACERS,POLARIS SPEEDO+LOW PROFILE SHIELD,KEVLAR DRIVE BELT,WIDER SWAMPLITES,BICYCLE HAND GRIPS,GIANT IGUANA NAMED "CHUCK"
|
|
|
Search Topic
