hows the strut going do you know if a fresh motor gets more power after breakin

watch on left turns she will hold up for a little but eventualy she will give out you should be good on right turns though

if shock blew def. get that fixed I had the right front go out on the sportsman left it go one month and went to power slide a turn the strut ended up giving and thats how I cracked the big ass mountain rock the messed up the frame

the pic. with the front up is just sitting mid seat in 3rd pining it. well as long as it gets traction

belts can be fun you just gotta role them onto the secoundary takes a min and might pinch a few fingers just watch your tips. its amazing what a new belt can do you can read the part# when looking at the belt from the side of the quad can't ya

my daughter has the best luck did you see her fish

for the record a clean four wheeler is an unridden one lol I ride every day I'm too lazy to clean it

I never heard it called the beaver pond I prefer hair pie but non the less as long as somthing gets wet haha finaly got a few pics on not many though.

the gasket might not be seated right to some times they like to adjust when getting put back into tight places. if over torqued it could also have rolled the gasket. I would pull the valve cover check out the gasket I aways use grey rtv on the corners and any where the gaskets have bends. pretty much I use a little every where the gasket is not straight but that should take care of it

ya def. check water filled motor's don't work to good then they work like anckers lol my valve cover torque is 15nm but my cover is magnizium and only 2 bolts with rubber seals

if its leaking at the corner of the gasket or where go's up or down not sure what it looks like put a little rtv on it just make sure to dry it off good first so it bonds