lt80 air filter
#1
#2
Remove the 2 screws that hold it up, disconnect the lil hose on the right side, remove the air tube on the left side, loosen the clamp that holds it on the carb and pry the air boot off the carb.
Here is the tricky part..stick your thumb in the top of the air box and pull out the left side. Do not twist,turn sideways,etc. It'll pull right out.
Here is the tricky part..stick your thumb in the top of the air box and pull out the left side. Do not twist,turn sideways,etc. It'll pull right out.
#3
The rubber intake from carb to black housing has to come off. About 3" up that housing it has a seam there's a outset rounded spot both sides above the clutch housing vent and 1/2" vent hose off plastic cover above foot brake. In that rounded spot there are Phillips screws upside down to loosen that section of housing,which houses the filter. Will have to be brought out the clutch side,will have to squeeze the wide side alittle to get it out.
#5
ok took filter housing off ,found a rip in the elbow..im guessing I know why the carb needs to be clean again? right? theres a K&N filter there..i'm gonna order another elbow but in the mean time im gonna wrap duct tape to keep it sealed..
BTW the filter housing came out pretty easy thanks
BTW the filter housing came out pretty easy thanks
#7
Trending Topics
#8
update not running again I want to take the tank out ,(to wash it out) I see the 2 bolts where seat covers how many more? do I have to take the front panel off?
plus gonna replace all fuel lines , fuel filter..to start fresh n hopefully solve this issue
any input would be great. this machine was running great yesterday and now it just cranks
plus gonna replace all fuel lines , fuel filter..to start fresh n hopefully solve this issue
any input would be great. this machine was running great yesterday and now it just cranks
#10
ok thanks I got it off. poured all the gas in to clear jug , see if I find any thing. ok how many vent ports does this carb have..1 for petcock 2 then gas line 3 whats next one to that ? I followed but leads no where. good or bad? sorry for the questions ,just trying to learn these machines.. not giving on this machine , I Will win lol