Is part #14 in the above diagram to reduce the top end speed. It seems that it doesn't allow the belt to ride up as high in the pulley as if it was removed. Was this one of the kid safety devices to keep the top speed down?
I am stoked!!! I just received all of my parts from motor sport super center. I am now ready to do all of my mods. Tonight I will take off the head and give to my brother who will take it to a machinist at the Ford plant and he is going to shave .030" off. All I have to do is buy the guy lunch. I have all new parts for the front clutch. I am going to cut the rear shoes down and I have the 13t/26t sprockets to re-gear the rear end. I can't wait to spend some "quality time" in the garage with my son.
Finally getting into the clutch. Front clutch went pretty smooth even thought it has never been serviced before (missing clutch cover gasket).It had a lot of moisture in the clutch case (some rust as well). Got it all cleaned out, removed two rollers and re-grease. The rear clutch I'm having some trouble. I will be referencing from "Transmission 2" diagram. Is the nut (#14) that holds the clutch assembly on a reverse thread? I had a hell of a time getting it off. Stripped the nut completely. Not sure if I can clean up the threads on the Fixed Drive Face (#2). My next problem is removing the movable drive (#10) from the fixed/mov drive (#2, #7). Is their a trick to this procedure? Any help would be appreciated.
I do believe I read that the nut on the rear clutch was a reverse thread nut. Good luck fixing that one. I can't comment on the rest because I have not had mine apart yet. I will most likely be tearing it down tonight and will let you know what I find out. Of course LT80 will probably come along soon with a definitive answer.
I would appreciate it Moe. I'm thinking I might have to order some parts. Hope I can savage some. This is taking away from performance budget. I agree, it would be great to get some advise from the MAN himself (Mr LT80)... Good luck tonight Moe.
""advise from the MAN himself ""
Send me the clutchs before you cost yourself any more $$ LMAO!! j/k
Ok..ya know I had to right..
But seriously, It's a left handed nut.
I may have a used post (fixxed face). I know I have a cpl nuts here.<- no wise cracks please....<EG>
__________________
3x top 10 40+ class
My beloved 250R
300EX
Kymco Mongoose
TRX350 Rancher
A cpl fast mini's mooreracing@windstream.net
814-922-7470
