Go Back   ATVConnection.com ATV Enthusiast Community » Brand Discussions Area » Honda

Reply
  #1 (permalink)  
Old 04-13-2009, 09:23 PM
Weekend Warrior
My Garage
 
Join Date: Apr 2009
Posts: 6
Question 2002 recon trx 250 es question

I have a 2002 recon with electric shift It stopped working it is stuck in first gear I had the problem before and found a fuse blown replaced it and it worked again this time the fuse was blown again but when I replace a new one it blows meaning I have to go though the wiring but someone said the 2002 has a manual shift to But I don't see it. where is it anyone know i would like to get it in neutral to move around easier
Reply With Quote
  #2 (permalink)  
Old 04-14-2009, 06:29 AM
Pro Rider
My Garage
 
Join Date: Jul 2006
Posts: 1,531
Default

When it was new there should have been an emergency gearshift either under the seat or in the tool kit.. Where the normal gearshift should be on a manual shift model you will see the gearshift post , it will have a 12mm hex on the end for the emergency shifter .. If the shifter is missing you can use a 12mm wrench or 12mm socket to downshift the bike to neutral...
Reply With Quote
  #3 (permalink)  
Old 04-14-2009, 09:02 AM
Weekend Warrior
My Garage
 
Join Date: Apr 2009
Posts: 6
Default Thanks

Thanks for the info I already found it though. I started thinking about it and looked where it would be if it was a manual and made myself a suicide shifter to use and do some riding still.
Reply With Quote
  #4 (permalink)  
Old 04-14-2009, 08:10 PM
Weekend Warrior
My Garage
 
Join Date: Apr 2009
Posts: 6
Unhappy wiring question

Quote:
Originally Posted by crpowell08 View Post
Thanks for the info I already found it though. I started thinking about it and looked where it would be if it was a manual and made myself a suicide shifter to use and do some riding still.

Anyone know where I can get a free wiring diagram for my 2002 honda recon trx250te es
Reply With Quote
  #5 (permalink)  
Old 04-15-2009, 06:13 AM
Pro Rider
My Garage
 
Join Date: Jul 2006
Posts: 1,531
Default

PM your email address ..
Reply With Quote
  #6 (permalink)  
Old 04-15-2009, 06:00 PM
Range Rover
when your holding the football - people will throw evrything they can at you to strip it away .... including the waterboy at the end of the bench.
My Garage
 
Join Date: Feb 2002
Posts: 185
Default

Don`t mean to jump on your post * but I have a VERY similiar issue ...

2005 electric shift.

My nieces bike * did a spring tune*up on it today (airfilter,oil,New batt, exc) as a B*day present.

Turn the key on & the 1st gear indicator flashes at me 3 times then pauses, over & over.

Start button does nothing.... I`m assuming because the ECU says "no, your in gear"

Won`t downshift into N.

Jump starter solenoid and engine cranks, but won`t fire (with rear wheels off the ground) assuming again, ECU says "no spark for you * your in gear"

Dealer said "Angle Sensor is bad"

What is this and where is it ?

What are your thoughts ?

HELP ... is MUCH appreciated, as I have a little girl here giving me those "please fix it" puppydog eyes.

Thanks
Reply With Quote
  #7 (permalink)  
Old 04-15-2009, 09:24 PM
Weekend Warrior
My Garage
 
Join Date: Apr 2009
Posts: 6
Default

Quote:
Originally Posted by HondaMechanic View Post
PM your email address ..

How do I pm you my email From where. Sorry i'm new to this forum and still trying to find my way around
Reply With Quote
  #8 (permalink)  
Old 04-16-2009, 12:27 AM
Weekend Warrior
My Garage
 
Join Date: Apr 2009
Posts: 6
Lightbulb more info

After looking at some pictures I realized the wire the fuse that keeps blowing on runs from the battery to the SW magnetic starter if that magnetic starter is bad could that cause the fuse to blow and is there anyway I can check it to see if it is bad. and for my own knowledge what does the SW stand for if anything
Reply With Quote
  #9 (permalink)  
Old 04-16-2009, 09:20 PM
Weekend Warrior
My Garage
 
Join Date: Apr 2009
Posts: 6
Thumbs up

I found my problem had some wires melted to the frame thanks anyway for all your help
Reply With Quote
  #10 (permalink)  
Old 07-29-2009, 02:47 PM
Weekend Warrior
My Garage
 
Join Date: Jul 2009
Posts: 1
Default

we are having the same issue but sometimes the electric shift works and sometimes it does not. its hard for my kids to have to use a wrench each time they need to shift and obviously they can't shift while driving. we've heard that you can buy a foot pedal to convert it back to manual shift. can anyone tell me where we can get one?

thanks
Reply With Quote
Reply

Tags
1st, 2002, 250, angle, change, fire, flashes, gear, honda, recon, sensor, shift, start, times, trx, wont



Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On