I have a 2005 rancher 400At. Im puting the top end back on and i dont know the specs or steps to tighten it down. Does anyone have a diagram and or torque specs for tightening the head back down. Thanks for the help.

 

Apply oil to the cylinder head cap nut threads and
seating surfaces.
Tighten the cap nuts to the specified torque.
TORQUE: 39 Nm (4.0 kgf-m, 29 Ibf-ft)
Tighten the cylinder head mounting bolts securely.

Install the cylinder head cover bolts.
Tighten the cylinder head cover bolts in a crisscross
pattern in 2 - 3 steps. 10 N-m (1.0 kgf-m, 7 Ibfft)

================================================== =======================================