Go Back   ATVConnection.com ATV Enthusiast Community » Brand Discussions Area » Honda
Sign in using an external account
Register Forgot Password?
Search

Welcome to ATVConnection Forums!
Welcome to ATVConnection.com.

You are currently viewing our forums as a guest, which gives you limited access to view most discussions and access our other features. By joining our community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is fast, simple and absolutely free so please, join the ATVConnection Forums community today!


Reply Share this with your friends
  #1  
Old 08-08-2005, 09:53 PM
Trailblazer
Garage is empty, add now
 
Join Date: Jul 2003
Posts: 74
Default Honda Rancher....no neutral light,no start???

I am working on a 2001 rancher and even though it is in neutral the light will not come on and it will not start.Is the neutral switch probably the problem?If so where is it located?
Reply With Quote
  #2  
Old 08-09-2005, 04:17 AM
Red Rider
Honda, accept nothing less!
Garage is empty, add now
 
Join Date: Dec 2002
Posts: 12,734
Default Honda Rancher....no neutral light,no start???

First, is this an ES or foot shifter??? If it is an ES, I'm thankfully not familiar with those!

If it is a foot shifter, maybe the switch that senses the neutral position has gone out? You can disable the switch anyway, so it will start in any gear. Do a search, because there are recent posts about that.

It should still bump start, whether in neutral or not. Guess it probably has to be in neutral to use the pull starter.
Reply With Quote
  #3  
Old 08-09-2005, 09:23 AM
action450s's Avatar
Pro Rider
1998 Honda Foreman
 
Join Date: Sep 2002
Location: NL
Posts: 1,205
Default Honda Rancher....no neutral light,no start???

Apply ground (- power) to the green wire with a red stripe on the starter solenoid located near the battery. If this gives you a neutral light and lets you start you know that the neutral switch is gone. Plus, if you wire a togle swith into this new circuit you will have start in gear (turn off the switch once its started to turn off the neutral light)

If its an ES, I dunno.
Reply With Quote
  #4  
Old 08-09-2005, 02:24 PM
Elite Pro Rider
Garage is empty, add now
 
Join Date: Dec 2003
Posts: 5,599
Default Honda Rancher....no neutral light,no start???

Check to see if the bulb is burned out, or missing.
action450s, is right, the motor can be fooled into thinking its in nuetral, and then it can be started.
Heres a page with the start in gear intructions for bypassing the nuetral switch, its for a foreman but works for rancher too. Its just like he said.

team badforeman


If you look at this pictoral
alba
#10 is the nuetral switch, and make sure the wire is still on it, and that it makes good contact. Its the same green/red wire,that the bypass taps in to. You could put an ohmeter on the nuetral switch, with the wire off,and when the tranny is in nuetral, you should read continuity to ground, if the switch is working . If the switch is good, then its a bulb or wiring issue.
Reply With Quote
  #5  
Old 08-09-2005, 09:26 PM
Trailblazer
Garage is empty, add now
 
Join Date: Jul 2003
Posts: 74
Default Honda Rancher....no neutral light,no start???

Thanks for the help guys.I ran a ground wire to the green/red stripe wire and got the neutral light on and the quad started.I did a test on the neutral/reverse switch and I don't get a ground when in neutral or reverse(from the switch).How big of a job is it to install a new switch?
Reply With Quote
  #6  
Old 08-10-2005, 01:57 PM
Elite Pro Rider
Garage is empty, add now
 
Join Date: Dec 2003
Posts: 5,599
Default Honda Rancher....no neutral light,no start???

Im not sure about the rancher, but on the foreman, which should be similar, you have to remove the cover over the stator, and unbolt the switch from behind. Real straight forward. They also recommend using a light threadlocker on the bolt when its installed.
The clymers manual for the rancher should have all the info on it, check the local library, they may have a copy, it would be in the 629.2 area of non fiction.
Reply With Quote
  #7  
Old 04-10-2006, 07:36 AM
Weekend Warrior
Garage is empty, add now
 
Join Date: Mar 2006
Posts: 10
Default Honda Rancher....no neutral light,no start???

It is not your switch but the Shift Drum. I have a 2000 rancher and am in the process of going through the same issues. If you jump the switch you have to worry about the broken piece in your case. this could cause severe damage in your gears if it goes through them. I was on the same track as you, but came to my senses when explained and shown exactly what happened.
Reply With Quote
  #8  
Old 04-22-2007, 05:58 PM
Weekend Warrior
Garage is empty, add now
 
Join Date: Feb 2004
Posts: 23
Default Honda Rancher....no neutral light,no start???

I know this forum is over a year old but I seem to be having this problem. How big of a project is it to properly fix this shift drum and is there really a broken part in the case now.
Reply With Quote
Old 04-22-2007, 05:58 PM
Reply Share this with your friends

Tags
2001, 350, 420, atv, bypass, disable, honda, light, neutral, nuetral, rancher, recon, reverse, stays, switch, trx



Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On