Kazuma utility need help bad
#1
#5
Ig I need to be more specific.. I got the quad for free it had no battery in it and hadn't been turned over in months. I take a battery out of my other quad and put it in the kazuma. I turn the key on the headlights work and the brake lights come on and the horn beeps. But when I go to push the start button it doesn't do anything. The silonoid don't click or anything. So next I proceed to short the silonoid just to see if it turns over. When I do that the lights go out and everything I check the fuse it is fine. So I unhook the wires from the battery and reconnect them and the lights come back on I've Tryed pressin on the brakes and everything hope this is clearer
#6
#7
Trending Topics
#8
OK
If you do what I posted and nothing happens here is what I would do
1 check the teather plug (usually under seat on frame left hand side) if its OK
2 get a test light hook it to ground put probe on small solenoid wire push button A-( light), bad solenoid or starter B-(no light) go to brake switch repeat all the way back to the start button I am pretty sure you will find your problem. BTW pull the spark plug it will turn over easier for testing purposes.
If you do what I posted and nothing happens here is what I would do
1 check the teather plug (usually under seat on frame left hand side) if its OK
2 get a test light hook it to ground put probe on small solenoid wire push button A-( light), bad solenoid or starter B-(no light) go to brake switch repeat all the way back to the start button I am pretty sure you will find your problem. BTW pull the spark plug it will turn over easier for testing purposes.
Thread
Thread Starter
Forum
Replies
Last Post
ATVC Correspondent
General RUV / UTV Discussion
6
03-22-2016 09:55 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)