Falcon 150 won't start
#1
#3
you need to go through the wiring harness/loom and check all of your quick connects. sometimes they'll back out of each other, while apart, check the blades inside of the quick connects to make sure they're engaged properly. if all of that is good, let's start checking your red kill slider switch.
#4
#6
#7
pressure washers get things real clean, but wreak havoc on electrical parts.
bogging down----that's indicative of lack of fuel/too much air. the ratio is off and what i mean is that you have plenty of air, not enough fuel. SO, pull the jets out one more time and clean them. it doesn't take much to plug them off.
bogging down----that's indicative of lack of fuel/too much air. the ratio is off and what i mean is that you have plenty of air, not enough fuel. SO, pull the jets out one more time and clean them. it doesn't take much to plug them off.
Thread
Thread Starter
Forum
Replies
Last Post
TegraQuad
1) Engine problems..
13
11-26-2017 01:40 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)