loncin 110cc wiring issues kids quad
#1
loncin 110cc wiring issues kids quad
Meny wires are split/cut from were they need to go.. starting from the batt the ground wire is disconected(I think I get bolted to the motor itself) two red wires from starter relay are connected but other two from are cut( tan and tanwhit) comming from the front I have a black and gray that is split also a blue and tan are slit.. I have no power.. I have looked at diagrams and no luck with colors of wires...needing help
#2
Join Date: Dec 2008
Location: Tracy, California, USA
Posts: 3,260
Likes: 0
Received 12 Likes
on
12 Posts
Please don't double post. It makes a mess of the forums.
This is your other post:
http://forums.atvconnection.com/chin...ng-issues.html
This is your other post:
http://forums.atvconnection.com/chin...ng-issues.html
#3
Hi Lynn, I have read your post and they are most helpful. Thx for those. I hane successfully wired this 110 and it now runs with a little idle problem , but it does run and the shut off switch works thanks to you and others with their info in this forum. I now am down to the lights and such trying to decide if I really want to tackle this part of it or just let it go as is. I have a 5 pin connector coming out of the back of the engine with no volts as it runs. I also have left 2 wires out of the engine with one at 5 volts and the other 0. I guess my question is do I input power into the 5 pin and figure it out or just ride. If I just ride what should I do with the 5 volts, can just tap it off I guess. Thanks so much for your help- I do struggle with finding the same thread- any help with would be great . People like you and mud mike help more then you know. Thanks
Thread
Thread Starter
Forum
Replies
Last Post
SOLOLUCKY
Polaris Ask an Expert! In fond memory of Old Polaris Tech.
3
05-25-2015 05:25 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)