I just bought a used Sunl atv 150cc and it will usually start after a couple of cranks. when it does start though, i can't get to stay on. It always dies. it has plenty of gas and the battery looks good. Any ideas?
by the way, i do now that sunl is a peice of junk but it was cheaper than the others.
KTM Patrol Former Chinese POW! Need a part machined or customized? Manual Mill & Lathe, CNC Mill, Cad/Cam. Need or want something engraved? Want something but not sure what?
KTM Patrol Former Chinese POW! Need a part machined or customized? Manual Mill & Lathe, CNC Mill, Cad/Cam. Need or want something engraved? Want something but not sure what?
Its a good place to start...idle screw will be sticking out of the side of the carb with a spring under it...with all the different carbs used it could be on either side.
The question in my mind is once it starts, can you keep it going if you apply the throttle? If it's something as simple as the idle being set too low, you should be able to keep it running with the throttle being applied slightly. If this is not the case, the idle circuit, and others such as even the main jet, may be stopped up and require the carb to have a thorough cleaning with carb cleaner and using compressed air to blow through all the holes in it.
Just my .02 cents. You can keep the change!
__________________
America will never be destroyed from the outside. If we falter, and lose our freedoms, it will be because we destroyed ourselves. ~Abraham Lincoln
2007 Honda Foreman 500 ES 4X4
2008 Honda Rancher 420 ES 4X4
3 2007 Tao Tao 110 quads (for the kids)
2001 Yamaha Road Star 1600
KTM Patrol Former Chinese POW! Need a part machined or customized? Manual Mill & Lathe, CNC Mill, Cad/Cam. Need or want something engraved? Want something but not sure what?