1982 ATC250r - ATVConnection.com ATV Enthusiast Community

calibear2003 · #1 (**permalink**) 01-07-2009, 06:37 PM

Hello...
I have a 1982 atc250r. I would like to change the rear axle hubs to a later year. I am limited to wheel choices with the stock 4/130 bolt pattern, so I would like to change if possible and use a hub from either a later 250r or from a 200x. Can anyone tell me what will work on the 1982 axle spline????
Thank you in advance....

honda185s · #2 (**permalink**) 01-20-2009, 12:05 AM

Man whats with all these posts concerning 250r's? Im yet to have even seen one around my town. Sorry calibear can't help you here, but I will do you the favor of putting your post at the top of the list seeing as its unanswered [img]i/expressions/face-icon-small-smile.gif[/img]. Maybe email dratv.com they have been pretty helpful with me in the past. Although I don't think they stock much for 250r's.

YTM_225_DX_LOVER · #3 (**permalink**) 01-28-2009, 10:20 PM

Sorry I can't help you with the axle spline question, but the rear rims for any suzuki trike or quadrunner built between '84 and '87, plus the 85-88 LT230 Quadsport, the 89-90 LT250 Quadrunner, the 85-86 LT250R Quadracer, 87-88 LT300EH Quadrunner, Plus the ATC 185 and 200S, all have the 4/130 Bolt Pattern, and most of the Suzukis are 9 or 10 inch rims. You think your bolt pattern is hard to find? I ride an '83 Yamaha Tri-Moto 225DX. It has a 3x100 bolt pattern. find anything other than an 8" rim to fit that. If you do, lemme know

MadMel777 · #4 (**permalink**) 02-22-2009, 06:23 PM

i use this sight to see if something will interchange on my trikes

http://www.mud-throwers.com/atv_wheel_chart

Nathanhanover · #5 (**permalink**) 03-05-2009, 03:19 AM

Try asking a Honda Dealer???

Saul76 · #6 (**permalink**) 03-24-2009, 10:47 PM

hubs from a 300 or 400ex will fit perfectly.

More info here - www.airfoolers.com

TrikeMaster · #7 (**permalink**) 11-01-2009, 05:22 PM

I tried 83-84 R and they don't fit!

MadMel777 · #8 (**permalink**) 11-03-2009, 06:58 PM

try this ,,, got alot of good info here ... Login

useless · #9 (**permalink**) 11-09-2009, 07:58 AM

Quote:

Originally Posted by calibear2003

Hello...
I have a 1982 atc250r. I would like to change the rear axle hubs to a later year. I am limited to wheel choices with the stock 4/130 bolt pattern, so I would like to change if possible and use a hub from either a later 250r or from a 200x. Can anyone tell me what will work on the 1982 axle spline????
Thank you in advance....

That is going to be real tough if you are going to keep the 4/130 bolt pattern. I swapped to 4/110.