Pages: 1
Posted by: Mxracer98
Ive been looking around for the nearest Cannondale dealers, but the search on Cannondales website no longer comply's to quads.
I live in southeast wisonsin, Near Kenosha does anyone know of any close dealers?
or the throttle position senor part number?
thanks
Posted by: Mxracer98
Hey, Thanks alot for the help...
Posted by: Mxracer98
Well it seems that i cannot find the part on cdaleparts.com, Ill just have to ring up that dealership and see what the price is for the throttle position sensor, anyone know how hard it is to install??
thanks
Posted by: Mxracer98
Thanks... I emailed the guy about the part....
I also drained the fuel tank and put new gas and fuel filter in... Same problem still
Im hoping that its the throttle position sensor...
Thanks again..
Posted by: Mxracer98
Ill hook up the ohmeter and see if I get any drops when I jam the throttle.... which seems to be the problem...
Posted by: cannondale27
TA Motorsports (920)682-1284 It is located inFrancis creek 10 minutes north of Manitowoc on I-43.I work there part time.The part number you are looking for is #5000409.If you cant get the part you might try cdaleparts.com
Posted by: cannondale27
Anytime.
Posted by: cannondale27
Cdaleparts doesnt list all the parts he has you need to email him.
Posted by: WISTECH
Just to re asure you cdale 27 is right.The part number is 5000409. The dealer cost is $24 and the retail is $47 It took me less than 1 minute to find the part number and cost . Its a good thing I downloaded every manual and parts guide. Thats faster than any dealer ill bet. I believe optimum has these parts too.
Posted by: WISTECH
Have you done any diagnostics with the D&M software. A bad tps would show up plain as day if it were bad. You can also check it with an ohmeter if you dont have the software. The service manuals are all available for free from cannondaler info center. A fuel pressure check will tell if its a fuel related problem . I would help you out if we were closer to each other . Im in central wis. If you pay for the liscense for your quad I could also hook up my laptop and check your efi system.
Posted by: WISTECH
The efi manuals shows how to do it in great detail . You just slowly move the throttle and make sure the meter registers a nice even inc rease without jumping.
