Pages: 1
Posted by: razormazer
727,
Mclaren F1 (streetcar i assume you are talking about) only hits like 7600..... Its a big 6.1 V12 , and oh yeah they quit making them many moons ago....
Posted by: airtimehocutt
i have the 03'cannible with the motto map and full hmf exhaust. although i have not ridden the bike much, the few times i have ridden it,hitting the rev limiter was not a problem. (14/42 gears) i was actually shifting when i thought i was close to the rev limiter only to find out later that i was not even close. the rev limiter with the motto map is 11,600 rpm. the cannible limiter is set at 10,600. maybe you still have the cannible map by mistake. also, 11,600 rpms is a lot. a 250r two stroke will turn approximately 8000 to 8800 rpms. hope this helps
Posted by: airtimehocutt
save your money, for $6500 you can hit 11,600 with a c-dale
Posted by: airtimehocutt
since you have two cdales set up differently, why don't you share with us how each one runs compared to the other one. and please tell us what the mods are for each bike. thanks
Posted by: 727Banshee
Quote
Originally posted by: airtimehocutt
i have the 03'cannible with the motto map and full hmf exhaust. although i have not ridden the bike much, the few times i have ridden it,hitting the rev limiter was not a problem. (14/42 gears) i was actually shifting when i thought i was close to the rev limiter only to find out later that i was not even close. the rev limiter with the motto map is 11,600 rpm. the cannible limiter is set at 10,600. maybe you still have the cannible map by mistake. also, 11,600 rpms is a lot. a 250r two stroke will turn approximately 8000 to 8800 rpms. hope this helps
I wish we could hit like 19k like the maclern F1 but to bad I dont have 1 million to buy one.
Posted by: armoks
Like I said in the other post I had the same problem that's why I started changing gear ratios. The best for me turned out to be 15/42. But I still haven't tried it out on the trails due to injuries but the doc said after my therapy i'll be able to ride again, That should be about the middle of jan so I'll let everyone know thenBR>
Posted by: mountainman10
I also have the 15/42 gear ratio and it does seem to help a little. I would like to know if the rev limiter can be raised any higher? Surely someone has tried it.
Posted by: Sandfan
Trying to get some input.
My Cannibal with the moto pipe and moto map hits the rev limiter, like all the time. I find myself short shifting. Does this seem to be what others are experiencing? The bike revs out so fast, sort of like a 2 stroke. It seems like the rev limiter should be higher.
Thanks for the input.
Posted by: Sandfan
Thanks for the input. I will be trying the new gearing over this next week. And no, I don't still have the cannibal map and there is a unbelievable difference between the way it was and the way it is, also we have the speed map with the Trinity pipe on the other one and it doesn't feel even close.
