Pages: 1
Posted by: smitty911
I have also seen PIA lights installed DUBYA1 has them and did a write up about putting them in. AT night I have been taking off the COvers and pointing them down.
Smitty
Posted by: smitty911
The new covers don't have that little ridge on the inside.
C-dale,
If you do a search at TT Dubya has a write up about putting the kit on his and what the amp draw is. Pictures included.
Smitty
Posted by: Cannitor
ab,first off remove the covers
then remove the black rubber gasket(this will allow more light out)
then reaim your lights down(further than you might want to)and replace your covers
it looks odd but it works,there is no need to cut any plastic...
cannondale needs to rethink thier headlights
Posted by: cannondale27
Cannondale just came out with new covers the headlights are now mounted in the covers you can look in the parts bulletin on there website for the part numbers but that should take care of your problem.
Posted by: mxrookie
here is the link to duyba 's headlight rebuild piaa headlights .
Posted by: AmericanBadass
on my dale the head lights suck like all dales. the point to the sky and the bike love to wheelie so that does not help. what can i do to help this? cut the covers to point the lights down more or what? i wanted lazer stars but i dont know if i need to mess with the stator or what?...or if i can. plus i heard that the LS band breaks alot. and the dale has the shacks so that would not help. thats 4 the help.
Posted by: Cdale1
smitty i to was lookin to get some piaa's but im not sure if the stator would handle it have that guy call me
Cdale1
