Pages: 1
Posted by: jcv400ex
Check with NACS also. www.nacsracing.com
I know they have the PEPS in for the Cannondales.
Posted by: jcv400ex
I don't know if your totally sold on the Denton or not...but Nacs does have the PEP unit in stock.
PEP STEERING STABILIZER PN- NC216 Price- $139.95
Posted by: MrP
Kory Ellis uses a Denton on his Cannondale. It looks like the same one that goes on a 250r and 400ex.
Posted by: Cannitor
i have one on my raptor and it works great...
i forgot where i bought it from(other than denton)
anybody running one on there "C"?i want to get one for the c...is denton making one?
Posted by: Cannitor
just called denton racing
they dont make a steering stem clamp to fit the cannondale
said there wasnt enough call for them to warrant manufacturing the clamp
just thought you guys should know...
what are you guys using for steering stabilizers???
Posted by: Cannitor
denton did say you could buy the yamaha clamp and do that so yes honda55 that is correct...but...has anybody personally tried this on a cannondale
i guess what im asking here...is the yamaha clamp the correct clamp?
Posted by: Cannitor
fyi
atvaddiction sells the 400ex steering stabilizer for the"C"(Denton)
BUT...they are currently backordered on the cannondale steering stem clamp
160.00 +shipping for stabilizer and clamp(when available)
Posted by: Cannitor
denton told me the 16 is a misprint on the new website
the denton on my raptor has 7 clicks...adjust on the fly to changing conditions..
the pep is a 3 setting,get off the bike and grab a tool setup...isnt it?
Posted by: 1cannonman
Cannitor--Yup did it and it works great. One of the best improvement that I have done. Kinda like floating on a cloud. Good luck.
BTW I got mine from Denton and told them how bummed I was and they knocked off some money.
Posted by: lt250r91
Well that sucks. I was planing on buying one this fall. Guess I'll have to looking into geting the PEP or Graydon one then.
Posted by: lt250r91
Thanks, I just might have to order one from them along with the complete HMF (last I heard they were charging $400 for the complete system) at the end of next month. Can't put either on the machine until the end of the season do to running the stock 4-stroke class.
Posted by: lt250r91
I bought a PEP from Nacs a couple years ago for the 91 quadracer. The down falls were not rebuildable and only 3 position adjustments. The next one I buy will be rebuildable and have at least 5 different adjustments. The Denton is the one I'm looking at do to it is rebuildable and has 7 or 16 different settings (I've seen it adverised as both).
Posted by: cannondale27
I have the denton on mine its the nonrebuildable type with seven clicks 250r square end and banshee round I just used a hole saw to cut out the round end it really works great.
Posted by: madini
Used Denton from my 400EX.Got steering stem clamp at ATVADDICTION...........no problem!!!!
Posted by: Honda55
Just machine out the clamp that goes to the stem that's all, it works.
Posted by: Honda55
I seen one at EAST COAST ATV and ECA says they used honda.Actually I was planning on putting one on mine in the next day or so, I'll let you know how I make out.
Posted by: RatSoup
My Cannibal had the stem mount welded on already. I just used the
Denton damper off my Honda 400EX. The frame clamp fits perfectly.
It actually fit better on the Cannondale than the Honda.
Posted by: dubya1
I am runnin a WER stabilizer. It works very well.
