Pages: 1
Posted by: Mxracer98
I have a moto-map on my cannibal, I really couldnt tell you if there's a difference, there's a ton of more bottom end than a 400ex that piped and jetted with an air filter, its lifts the wheels right off the ground with no effort. carey told me i'd get more low-mid range power.
Posted by: CornDog
<< anyone know if you can re-map the 500 for the current blaze map? I dont know. >>
i think you can get like one map for cold starting. oh well, i am gettin something else...
Posted by: YoDaddy
Maybe the Blaze remapping might be best for you. Unless you are a pro or a good GNC racer, I don't think that the difference between a moto and blaze remapping is going to be that big of a deal on the mx track. I'm sure the blaze map would do just fine for the "average mx'er".
P.S. I know there is a difference between the blaze and moto mapping... I was trying to say that if you aren't a full time mx racer, the blaze mapping will do good on the mx track as well as in the woods.
Posted by: YoDaddy
Trout- are you sure? I don't know much about the mapping and computer and all that but I believe you can have the 500 remapped but that the 1000 can "store" more maps... If I am way off, PLEASE let me know. I wouldn't want to give someone the wrong information.
Posted by: briansgi
I've had the moto map installed on my cannibal plus the HMF silencer but I've yet to ride it. Going to Little Sahara this weekend so I'll report back in when I get back. I would also call Kyle or Carey at R&S Performance and ask them if there are major differences between the Blaze and Moto maps.
Posted by: briansgi
Knowsalot's dealer does not charge anything but you would have had to purchase the quad there. My dealer was going to charge me their labor rates but they had never done one, so I didn't feel like paying an hours labor rate while they "learned" on my quad. I shipped mine to R&S, got a good deal!
Posted by: briansgi
I'll PM you.
Posted by: trout
I agree with yodaddy, I want to ge the blaze map, better than the speed and cannibal but not as specific as the motto. But I have the 500ECU so I dont hink I ca ngetthe map with out an ECU upgrade.
Posted by: trout
anyone know if you can re-map the 500 for the current blaze map? I dont know.
Posted by: trout
brian how much did it cost you to ship it to RS, I am thinking about doing the same thing, but I live in colorado? and how did you ship it?
thanks
Posted by: trout
www.rsperformance.net
Posted by: smitty911
Trout,
When I talked to Cannondale abuot this they said they could remap the 500ECU you just can't adjust every little peramiter of it.
Smitty
Posted by: Canman440
Has anyone had there EFI re-mapped from the stock cannibal to the moto mapping? I was thinking of changing the pipe & going with the moto mapping. But my dealer told me it would move my low & mid range to a hard hitting top end. I like to do some trail riding with my son and don't want to loose my low-end torque. But I do MX too. Just contemplating what to do.
Posted by: ChrisMac1
I rode the Moto and Blaze Map and really didnt notice a difference but the dealer told me the racers said they liked the Moto map better as they could keep the front wheels on the ground better to get the holeshot so thats why I have the Blaze map.
Mac
Posted by: haulin
what do the dealers charge to re-map your bike?
Posted by: haulin
hey brian, what is R&S's web site? I haven't heard of them until a few days ago.
Posted by: haulin
cool, thanks. I'll check them out.
