Pages: 1
Posted by: Speedwerx
The first palce I would start is with the clutching, do you know what parts are in it ? If you feel the clutching is ok I'd look at v-force reeds, reed spacer and one of our billet heads. If you still want more than I'd look at cyl porting, or possibly our 440 kit along with a 38 or 42 mm carb kit.
If you have any more ?'s please let us know.
Posted by: Speedwerx
We have a clutch kit designed for our pipe already. It depends on what elevation you ride at as well.
Posted by: badazz400
man you are geared like super low too.
a red/yellow spring with 255's mike work well with your setup
Posted by: joshk1234
What should i do about improving the middle end on my sport 400? The mods are as follows below...
Posted by: joshk1234
What springs and weights do you recommend for my clutch given the mods that are on it that are listed below?
Posted by: joshk1234
What all did you take off to shed that much weight?
