Pages: 1
Posted by: Speedwerx
The cam we offer for the 500's shouel fit in the 425 we have never done it but all of the part# s match up. Minor jetting and clutch ing changes will need to be made too. On the 700 we havea cam that works great on that machine. Do you have any other mods done to either machine? THe 700 will require minor jetting and clutching changes too. On 4-strokes the cam is the way to go 90% of the time for good hp increases.
Posted by: Speedwerx
If you have any more ?'s please let me know.
Posted by: Speedwerx
The 700 cam is 517.00 it comes with all gaskets and new valve springs too. The 500/425 cam is 355.50 you cna use your stk. gaskets with the 500 cam. Head porting on each model is an extra 200.00 each. You will need to make a few minor clutching changes too but I will be able to tell you what you need to change.
Posted by: Kerbbirds
I have a 97 425 magmum and was wondering if you make a better cam for it? If so how much and what jetting and clutc h changes do you recommend?
Same questions for an 03-700 I hear changing the cam will do alot for this bike.
Posted by: Kerbbirds
All my mods are listed below, how much are the cams?
