Pages: 1
Posted by: mywifesquad
It would be ok to disconnect the hoses and reconnect them to the engine to get you home. I wouldnt ride it like this for very long because the engine runs about 50-70 degrees cooler with the cooler.
Posted by: buckaroo50
Originally posted by: jetmotoracer
i was thinking u know how u try to keep sticks etc away from ur oil cooler ... if some thing where to go threw it and it started spertin oil couldnt u turn it off and dis conect the hoeses from the cooler and risde it back to ur truck or house????? because its still air cooles right????... but no won wants to replace a oil cooler....
Yes, carry a short piece of copper tubing about 2" long, and a couple small hose clamps in your tool kit. If you make a puncture to the radiator disconnect the hoses and put the copper tubing in, clamp it and drive home slowly and stop often to let the engine cool, until you get the radiator fixed properly. You might also want to carry a little extra oil just in case you need it.
Posted by: outofline
If you by-pass the oil cooler you are not going to have to drive slow and stop often to get home, that's the worst thing to do! For years I have ridden 100% air cooled motorcycles and never had to ride slow and stop often. Actually the best thing to do is go faster to get more air going passed the heat fins on the head. And stopping will only cause the motor to heat up more, it needs cool air to cool down! Remember this is an Air Cooled motor that they slapped on an Oil Cooler to drop the running temp down just a bit to help with performance and longevity of the motor and it's a selling feature over other air cooled quads that have a little worthless Computer Fan (that seems to go bad with in a few months) mounted in front of the head like you find on a lot of air cooled Chinese quads!
Posted by: jetmotoracer
i was thinking u know how u try to keep sticks etc away from ur oil cooler ... if some thing where to go threw it and it started spertin oil couldnt u turn it off and dis conect the hoeses from the cooler and risde it back to ur truck or house????? because its still air cooles right????... but no won wants to replace a oil cooler....
Posted by: jetmotoracer
yea thats what i thought would happen.... i thought my quad runs hot now i cant amajin what would happen if it broke and i had to do that
Posted by: jetmotoracer
no i was just saying in not gunna carry all that and i want to make a oil cooler gard
Posted by: pimpsmurf
get some screening from autozone/advance auto or just about anywhere. Just cut it to fit and bolt it on. It would also be very very easy to use a much better heater core/radiator for the oil cooler. You might have to make a custom mount, but it could be much bigger and really help cool the engine.
-JNY
