Pages: 1
Posted by: BONER
The only o-rings or gaskets I see are between the reservoir and assembily and the resivor and reservoir cover.
Good luck if you try.
Posted by: ttaylor
I haven't taken the AC one apart but I have taken one apart on my race bike. They are really easy just make sure the you get the seals facing the right direction. This seems to be a problem with some of the cats. You may want to take it to the dealer and see if he won't replace it.
I seen that you have put on a temp gauge. I would like to know how you did that and where you mounted the gauge. I am going to do this but havn't figured out how or where to install the probe into the water line. I have the gauge just sitting at the house. Any help would be greatly appreciated.
Posted by: Arctic500
My master cylinder is leaking fluid back into the resevoir. Has anyone tried to take
it apart and replace the seal that leaks? I know several of you have talked about buying
the new style cylinder and resevoir. Is AC delivering those parts now, or are yall still waiting for one? And, what is the price on the new cylinder and resevoir? I'm doing
several mods and maintanence right now, so the bike is all apart. Just finished with a fan switch and temp gauge. Any input would be appreciated.
Bill
