Pages: 1
Posted by: newbeatle
I'm about to begin a project, & need 8 - 16 Kawi 4 on 137 mm hubs... the condition is not important, the stud holes can even be stripped, as long as the splines are OK, & they are not bent...
Posted by: newbeatle
a few gear reduction lifts... should be able to bolt on enough lift on any SRA quad, to be able to drive over a layed down 55 gallon drum... that should interest a few "mudders"
Posted by: jpsdiving
What are you building Mike, trouble here
Posted by: jpsdiving
You build, it they will come
