Posted by: Red400EXRod

Quote

---

Originally posted by: HappaRap

Quote

---

Originally posted by: Red400EXRod Good day at the garage sale yesterday!
Today is discount day! Everything has been marked down!

---

You said Sunday, everything would be free, thought I'd bring a 53 footer and clean your garage out, might as well grab all the junk inside your house too hr>

Posted by: Bigdaddy660R

Posted by: 2mnyToyz

Quote

---

Originally posted by: MeIsCheech
So sounds like there is a try to get PSAR to Beverly for the 29th to the 1st. Who's in?

Big Daddy with sum smack downFri-Sun
Karl?
Cheech and Jakieboy Fri-Sun
Loic and Tammy and boys with Cheech Fri-Sun


Anyone else?

---

Posted by: 2mnyToyz

Quote

---

Originally posted by: Red400EXRod

You calling my stuff junk?!

---

Posted by: Red400EXRod

Quote

---

Originally posted by: 2mnyToyz

Quote

---

Originally posted by: Red400EXRod

You calling my stuff junk?!

---

Ummm, do you want it?

---

Posted by: 2mnyToyz

Quote

---

Originally posted by: Red400EXRod

Quote

---

Originally posted by: 2mnyToyz

Quote

---

Originally posted by: Red400EXRod

You calling my stuff junk?!

---

Ummm, do you want it?

---

The stuff IN my house, yes!
The stuff for the garbage sale is valued treasure that I'm tearfully parting with!

---

Posted by: Bigdaddy660R

Quote

---

Originally posted by: Red400EXRod
The stuff for sale is valued treasure that I'm tearfully parting with!

---

Posted by: 2mnyToyz

Posted by: Red400EXRod

Quote

---

Originally posted by: 2mnyToyz
How did the sale go yesterday? Worthwhile?

---

Posted by: tnemaloney

Posted by: Nickli

Posted by: tencubed

Quote

---

Originally posted by: Bigdaddy660R

Quote

---

Originally posted by: tencubed
you could gross out at 115,000 Lbs.

---

Not unless Happy has a overweight permit, THEN Happy would have to have the right Trailer configuration (Axles)
THEN there's the BRIDGE WEIGHT between axles that has to be right......... (that's the one that gets me).....

DID you know that our state is in the processes of building windmills........ 1st Walla Walla, Now Vantage. Here's why I bring this up. The GENERATORs weigh 133 thousand pounds, The GVWR on the load and equipment hauling it is close to 300 thousand pounds. It's a PUSH, pull TRUCKS, trailer set-up. It's over 250 feet long from the front truck to the rear truck. Unreal to see this traveling down the Interstate......... hr>

Posted by: tencubed

Quote

---

Originally posted by: tnemaloney
good mornin everone ........hubbie is doing better he is getting up and somewhat walking now.......x-ray said his back is kinked to the right......the doc is going to keep him in the office all day monday to get it back in place so maybe he can go back to work on tuesday (like he wants to lol)

---

Posted by: Bing

Quote

---

Originally posted by: tnemaloney
i took my hubbie to the chiropractor today and he needs to go back in the mornin for x-rays there was to much swelling to do it today lol it took over an hour to get him up and to the truck ...and i feel really bad for him right now he is stuck on the floor and cant get comfy in any position

---

Posted by: TractorPacker

Posted by: Bigdaddy660R

Quote

---

Originally posted by: TractorPacker
I don't see why a 130,000 pound load has 170,000 pounds pulling it. I would think 12 axles would get it done.
4 on the truck
3 on the jeep
3 on the lowboy
2 on the booster

I guess thats why I only get 10 axles to haul 110,000 pound hoes........

---

Posted by: TReX400

Quote

---

Originally posted by: TractorPacker
I don't see why a 130,000 pound load has 170,000 pounds pulling it. I would think 12 axles would get it done.
4 on the truck
3 on the jeep
3 on the lowboy
2 on the booster

I guess thats why I only get 10 axles to haul 110,000 pound hoes........

---

Posted by: TReX400

Quote

---

Originally posted by: TReX400

Quote

---

Originally posted by: TractorPacker
I don't see why a 130,000 pound load has 170,000 pounds pulling it. I would think 12 axles would get it done.
4 on the truck
3 on the jeep
3 on the lowboy
2 on the booster

I guess thats why I only get 10 axles to haul 110,000 pound hoes........

---

I just need one axle for my hoe

---

Posted by: Dirtmomma

Posted by: TractorPacker

Quote

---

Originally posted by: Bigdaddy660R

Quote

---

Originally posted by: TractorPacker
I don't see why a 130,000 pound load has 170,000 pounds pulling it. I would think 12 axles would get it done.
4 on the truck
3 on the jeep
3 on the lowboy
2 on the booster

I guess thats why I only get 10 axles to haul 110,000 pound hoes........

---

Dunno, why don't cha run on down their and set um straight........ hr>

Posted by: TractorPacker

Quote

---

Originally posted by: TReX400

Quote

---

Originally posted by: TractorPacker
I don't see why a 130,000 pound load has 170,000 pounds pulling it. I would think 12 axles would get it done.
4 on the truck
3 on the jeep
3 on the lowboy
2 on the booster

I guess thats why I only get 10 axles to haul 110,000 pound hoes........

---

I just need one axle for my hoe

---

Posted by: TReX400

Quote

---

Originally posted by: TractorPacker

Quote

---

Originally posted by: TReX400

Quote

---

Originally posted by: TractorPacker
I don't see why a 130,000 pound load has 170,000 pounds pulling it. I would think 12 axles would get it done.
4 on the truck
3 on the jeep
3 on the lowboy
2 on the booster

I guess thats why I only get 10 axles to haul 110,000 pound hoes........

---

I just need one axle for my hoe

---

That must be a mini.

---

Posted by: tencubed

Posted by: RancherATCrazy

Posted by: RancherATCrazy

Posted by: LdyJay

Posted by: HappaRap

Posted by: HappaRap

Posted by: Red400EXRod

Quote

---

Originally posted by: LdyJay
Anyone have any need for a pair of 18" Dunlops? Put 20's on the R450 a few months ago. They have more than half tread I think. I have less than 6 rides on them. Off 8" rims. No sense in having them waste away in my quad closet if anyone is interested.

---

Posted by: Red400EXRod

Posted by: HappaRap

Quote

---

Originally posted by: Red400EXRod Happa, you post ho!

---

Posted by: tnemaloney

Posted by: warriorqueen

Quote

---

Originally posted by: TractorPacker
OK this just in me and Jeffy are doing the dunes, for turkey day. Reserved a spot for Th, Fri and Sat. Only one spot left at Horsfall.

---

Posted by: Dirtmomma

Quote

---

Originally posted by: tencubed
DM: Last summer a kid banged the door on my pickup just like happened to you. Made her mother give me her insurance information and turned it in. They paid for the repair, a little over five hundred bucks, with no questions ask.

That's it for today. GN PSAR

---

Posted by: Dirtmomma

Posted by: warriorqueen

Posted by: tencubed

Posted by: slomoe

Posted by: RancherATCrazy

Posted by: tnemaloney

Quote

---

Originally posted by: tencubed
Good Morning PSAR.

Happa, tne's broken better half is a sheetrocker. Maybe if you wait till he heals up you can trade a quad for some work. Give you a chance to get rid of some of that excess equipment. BR>

where does he sign lol j/k

---

Posted by: WildTurkey!

It's kind of funny, the network administrator is complaining the network is down and he's on here

---

Posted by: WildTurkey!

Good morning PSAR

---

Posted by: RancherATCrazy

Quote

---

Originally posted by: WildTurkey151
It's kind of funny, the network administrator is complaining the network is down and he's on here

---

Talking about yourself again?

---

Posted by: WildTurkey!

Nope!

---

Posted by: LdyJay

Quote

---

Originally posted by: WildTurkey151
It's kind of funny, the network administrator is complaining the network is down and he's on here

---

Isn't that considered network testing and troubleshooting? Gotta test and isolate if the network is down. img src="i/expressions/face-icon-small-wink.gif" border="0">

---

Posted by: tencubed

Quote

---

Originally posted by: LdyJay

Quote

---

Originally posted by: WildTurkey151
It's kind of funny, the network administrator is complaining the network is down and he's on here

---

Isn't that considered network testing and troubleshooting? Gotta test and isolate if the network is down. img src="i/expressions/face-icon-small-wink.gif" border="0">

---

Or as the guy that works in our shop at the farm is so fond of saying "It ain't busted, I'm just fixin it!".

---

Posted by: LdyJay

Quote

---

Originally posted by: tencubed

Quote

---

Originally posted by: LdyJay

Quote

---

Originally posted by: WildTurkey151
It's kind of funny, the network administrator is complaining the network is down and he's on here

---

Isn't that considered network testing and troubleshooting? Gotta test and isolate if the network is down. img src="i/expressions/face-icon-small-wink.gif" border="0">

---

Or as the guy that works in our shop at the farm is so fond of saying "It ain't busted, I'm just fixin it!". hr>

I think that's my upper management's motto. Either that or they are fixing it until it's broke.

---

Posted by: wingdude

Good Morning PSAR

I am in New Orleans for the opening of the Superdome. Man, is this city still messed up. So many houses still empty with tons of trailers sitting in front yards. Very sad here.

Talk to you all tomorrow.

---

Posted by: Dirtmomma

Ten, yeah I had my car like maybe a week & some dumb azz must of sailed a shopping cart(metal) intot he front fender that just started it all!! I lOVE my little Elantra & now w/ the muffler & air filter I will have to say that she gets up & goes when I ask her too img src="i/expressions/face-icon-small-happy.gif" border="0"> I was coming back on the freeway Sat. night & some guy thought he wasn't going to let me in the fast lane well I stepped on the gas & it shot tot he fast lane img src="i/expressions/face-icon-small-happy.gif" border="0">img src="i/expressions/face-icon-small-tongue.gif" border="0"> it is quite impressive for a little 4 banger!! I like the Sonata too, but I was looking for something a little sportier!! There is plenty of leg room in the back for the kids which is nice on a smaller car.

OK so here's my new TOY img src="i/expressions/face-icon-small-happy.gif" border="0"> now I just have to unload my old pic software & load the new, just trying to decide if I wanna use my laptop or desktop!!! I did just find a pit bridge printer so I will see, heck maybe I just won't mess w/ the software if I get that!!

Well it's off to work for me HAVE A GOOD DAY EVERYONE!!!!!

---

Posted by: OneFlyCowboy

Someone should remind OFC weekends are for relaxing Not working Friggin sore today.. build 2,000 feet of 4 strand electric rope fence with 5-6" posts on 25' spacing.. allotta walkin around and picking up heavy stuff. the pre driver for the post holes is heavy.. its gotta be close to 150lbs to lug around. I finally got sick of carrying it and told the guy in the hoe HEY A$$HOLE you know this fockin things heavy.. Why don't you use the machine to carry it for focks sake

---

Posted by: Soccerd6

not sure if any of you folks on here are sleddars.... but even if you're not, come see some exciting riding and help raise $$ to help keep ORV riding areas open!!!!

DVD premier and SAWS fundraiser

---

Posted by: OneFlyCowboy

It was awsome riding this weekend... Very little dust and after a few laps all the grease was burned off and it was the Sticky clay crazy traction.. the rappy did good.. except when i Launched a jump in 5th and landed a lil bit farther than i had anticipated and came incontact with a large maple tree sideways. Them nerfs come in handy. .. I didnt get dislodged but was off course in the bushes

---

Posted by: tnemaloney

Quote

---

Originally posted by: OneFlyCowboy
It was awsome riding this weekend... Very little dust and after a few laps all the grease was burned off and it was the Sticky clay crazy traction.. the rappy did good.. except when i Launched a jump in 5th and landed a lil bit farther than i had anticipated and came incontact with a large maple tree sideways. Them nerfs come in handy. .. I didnt get dislodged but was off course in the bushes hr>

oh sure rub it in alittle more pleeessse lol j/k

---

Posted by: OneFlyCowboy

Quote

---

Originally posted by: tnemaloney


oh sure rub it in alittle more pleeessse lol j/k

---

but i ride everyweekend unless its raining

---

Posted by: warriorqueen

Quote

---

Originally posted by: DirtmommaOK so here's my new TOY img src="i/expressions/face-icon-small-happy.gif" border="0"> now I just have to unload my old pic software & load the new, just trying to decide if I wanna use my laptop or desktop!!! I did just find a pit bridge printer so I will see, heck maybe I just won't mess w/ the software if I get that!![\q]

Dm, if you want to get a photo printer, i would suggest the one at Target. I believe the one i have is a lexmark. I have never had any problems with it, and the pictures that it prints are very clear. You can use different size photo paper on it. If you use a full size sheet it prints three pictures on one page, but then you have to cut out every single picture. I use the 4 X ^ sheets, so i don't have to cut them out. Let me know if you want more info, i cna make sure i gave you the right name, and give you some numbers so you can look into it.

---

Posted by: tnemaloney

ya know my lil icon says im a pro rider but im not feelin it huh i must be doing something wrong

---

Posted by: Quad4Fun

Wow, what a fun weekend of racing img src="i/expressions/face-icon-small-shocked.gif" border="0">
Just a good thing the weather was nice.
Ashley's clutch on the yz motor was toast.
The clutch basket was hammered not allowing the plates to move.
Nothing a dremmel tool and about an hours time couldn't fix to get through the weekend.
Then she races the womens class, comes off the track and straight to line to start the 90cc class.
(Yes, she is racing the Blaster/YZ80 in the womens class against the big bikes img src="i/expressions/face-icon-small-happy.gif" border="0"> and still maintaining first place
She's yelling..dad..dad...come here........
The bolt fell out on the clutch lever....nothing cramming a stick in can't fix img src="i/expressions/face-icon-small-happy.gif" border="0">
The stick held up and she went on th take 1st.
Go to fire up Hayleys LT80, went to pull the choke and then.......... img src="i/expressions/face-icon-small-shocked.gif" border="0">img src="i/expressions/face-icon-small-shocked.gif" border="0">
I find the frame snapped in 2 places, don't know how I missed that BR>As always somebody's there to help. A guy happen to have his work truck there, a Welding truckimg src="i/expressions/face-icon-small-happy.gif" border="0">
Then, Hayley comes off the track. Shes says her front shock weren't working, they might be broke.
Good observation for a 9 y/o. Blew both front Works shock.
Then two races before her main, Ken (dsxbear) offers up his sons quad. Hayley was scared cause it's fast.
So he decides to take the Elka's off his sons and put on Hayleys. So we rushed to do a fast shock change and just got her to the line.
Ken is awsome.

That's racing though img src="i/expressions/face-icon-small-happy.gif" border="0"> It was fun getting through it all and we didn't miss a race img src="i/expressions/face-icon-small-happy.gif" border="0">
I wouldn't change the fun we are having for nothing.
Thanks Ken img src="i/expressions/face-icon-small-happy.gif" border="0"> He really is a great guy and so much fun to hang around with.
He even brought me some b-day presents for my LTR, he is my hero img src="i/expressions/face-icon-small-happy.gif" border="0">


Also, a stranger made an appearance BR>Haven't seen him forever and is kinda SKarce around here . hehehe
Bet you can't guess....I did give ya a hint though img src="i/expressions/face-icon-small-happy.gif" border="0"> BR>It was good to see ya again..........

---

Posted by: Quad4Fun

Anybody have a suggestion on where to buy clutch parts ?????
I am looking at RMATV

I need the basket and the clutch....
Looking for the Moose basket, primary drive gears, and clutch.
Found that stuff on e-bay, but auction not up until 10/1, and I need it by this weekend BR>Oh well.......
I'm gonna make some phone calls, can't find anything online........


Thanks a Bunch

Oh ya, I have found a couple on craigslist,
but if anybody comes across a yz80 or yz85 for a decent price, let me know.
I will take the whole bike.

---

Posted by: LdyJay

Quote

---

Originally posted by: Quad4Fun
Anybody have a suggestion on where to buy clutch parts ?????
I am looking at RMATV and DALTONPRO BR>
I need the basket and other dealy bob that goes inside the basket that holds the plates in.

Thanks a Bunch

---

I got my Heavy Duty EBC Clutch at RockyMountainATV for a good price. And as you know, they really have great service and fast shipping. Just my 2 cents.

---

Posted by: OneFlyCowboy

This was once reserved just for the spin.. But PSAR has been a bit......

---

Posted by: OneFlyCowboy

Quote

---

Originally posted by: OneFlyCowboy
This was once reserved just for the spin.. But PSAR has been a bit......

---

---

Posted by: OneFlyCowboy

Quote

---

Originally posted by: OneFlyCowboy

Quote

---

Originally posted by: OneFlyCowboy
This was once reserved just for the spin.. But PSAR has been a bit......

---

hr>

img src="i/expressions/face-icon-small-shocked.gif" border="0">

---

Posted by: OneFlyCowboy

I take it Im not allowed to quote myself 10 times

---

Posted by: Scootergptx

Quote

---

Originally posted by: OneFlyCowboy

Quote

---

Originally posted by: OneFlyCowboy

Quote

---

Originally posted by: OneFlyCowboy

Quote

---

Originally posted by: OneFlyCowboy
This was once reserved just for the spin.. But PSAR has been a bit......

---

hr>

img src="i/expressions/face-icon-small-shocked.gif" border="0">

---

img src="i/expressions/face-icon-small-shocked.gif" border="0">hr>

img src="i/expressions/face-icon-small-shocked.gif" border="0">img src="i/expressions/face-icon-small-shocked.gif" border="0">

---

Posted by: TPR

Man I am sure glad I found that tumbleweed link way back when.....we have gotten a lot of use out of it!!BR>
TPR

---

Posted by: Scootergptx

Quote

---

Originally posted by: TPR
Man I am sure glad I found that tumbleweed link way back when.....we have gotten a lot of use out of it!!BR>
TPR

---

I had to save it. Couldn't find it for the longest time.

---

Posted by: OneFlyCowboy

Quote

---

Originally posted by: TPR
Man I am sure glad I found that tumbleweed link way back when.....we have gotten a lot of use out of it!!BR>
TPR

---

It does come in handy

---

Posted by: TPR

Let's try a new one...Clicky

TPR

---

Posted by: TPR

Quote

---

Originally posted by: Scootergptx

Quote

---

Originally posted by: TPR
Man I am sure glad I found that tumbleweed link way back when.....we have gotten a lot of use out of it!!BR>
TPR

---

I had to save it. Couldn't find it for the longest time.

---

Yeah, it's one of "My Favorites"

TPR

---

Posted by: Scootergptx

Quote

---

Originally posted by: TPR
Let's try a new one...Clicky

TPR

---

A little too quiet.

---

Posted by: tnemaloney

just got back from the chiropractor hubbie is doing great he can walk on his own yeah lol doc says he prob....be back to work on wednesday

---

Posted by: tencubed

Quote

---

Originally posted by: tnemaloney
just got back from the chiropractor hubbie is doing great he can walk on his own yeah lol doc says he prob....be back to work on wednesday

---

That's good news tne. Don't let him get too ambitious too quick, re-injury would be a bad thing.

---

Posted by: TReX400

Quote

---

Originally posted by: OneFlyCowboy

Quote

---

Originally posted by: tnemaloney


oh sure rub it in alittle more pleeessse lol j/k

---

but i ride everyweekend unless its raining hr>

Thought i saw ya over in Tahuya, but this Raptor didn't have all the flashy stuff yours does.

---

Posted by: 2mnyToyz

We're making a day trip to the chit-hole on saturday...

started putting the wheelie bar on the bike and discovered I won't have a flag mount. I have to take the grab bar off to put the wheelie bar on... I'll just leave it here this weekend.

Albany has it's last sand drags for the year on the 7th and 8th, I'm shootin' for there.

---

Posted by: HappaRap

Quote

---

Originally posted by: tnemaloney just got back from the chiropractor hubbie is doing great he can walk on his own yeah lol doc says he prob....be back to work on wednesday

---

That's great news, now send him my way, I have way too many bare walls

---

Posted by: HappaRap

Quote

---

Originally posted by: tencubed

Quote

---

Originally posted by: tnemaloney just got back from the chiropractor hubbie is doing great he can walk on his own yeah lol doc says he prob....be back to work on wednesday

---

That's good news tne. Don't let him get too ambitious too quick, re-injury would be a bad thing.

---

If he does my sheetrock, I'll do all the heavy work, I'm a great gopher, just ask my Sparky, I got to pull all the old wire and run the new wire BR>

---

Posted by: HappaRap

Quote

---

Originally posted by: 2mnyToyz We're making a day trip to the chit-hole on saturday...
started putting the wheelie bar on the bike and discovered I won't have a flag mount. I have to take the grab bar off to put the wheelie bar on... I'll just leave it here this weekend.

---

Sorry to hear that, was hoping to hear of some great racing between you and that Rappy. Good Luck at the drags in Albany.

---

Posted by: 2mnyToyz

Quote

---

Originally posted by: HappaRap

Quote

---

Originally posted by: 2mnyToyz We're making a day trip to the chit-hole on saturday...
started putting the wheelie bar on the bike and discovered I won't have a flag mount. I have to take the grab bar off to put the wheelie bar on... I'll just leave it here this weekend.

---

Sorry to hear that, was hoping to hear of some great racing between you and that Rappy. Good Luck at the drags in Albany.

---

That's leaving the wheelie bar here this weekend... the bike is still going set-up with the shocks. Probably be gettin' my butt kicked by BigD because of not having the wheelie bar.

Who knows, I might figure out what to do before then...

---

Posted by: MeIsCheech

Quote

---

Originally posted by: 2mnyToyz
We're making a day trip to the chit-hole on saturday...

started putting the wheelie bar on the bike and discovered I won't have a flag mount. I have to take the grab bar off to put the wheelie bar on... I'll just leave it here this weekend.

Albany has it's last sand drags for the year on the 7th and 8th, I'm shootin' for there.

---

Looks like just Jakieboy and I will be going for just a day trip Saturday also. Everyone else from my group has canceled.
I have added a K&N, EFI, and a slip on, but don't plan on being able to hang with U high dollars Draggers.

---

Posted by: RealtorRider

If work cooperates, I'll be there Sat too for a day trip!

---

Posted by: 2mnyToyz

no worries... the motor is just broke in. I broke it before... the one-way fused to the fly-wheel last time. I'm skeerd of opening it up. The builder and the polaris shop are still scratchin' their heads on why that happend.

---

Posted by: MeIsCheech

Ya Billy!


Anyone else? Come on all U PSAR'S lets have a good old get together for just one Saturday! Beverly Dunes is the Place!

Quad trailer convoy starts 7am North Bend McD's

---

Posted by: OneFlyCowboy

Quote

---

Originally posted by: TReX400

Quote

---

Originally posted by: OneFlyCowboy

Quote

---

Originally posted by: tnemaloney


oh sure rub it in alittle more pleeessse lol j/k

---

but i ride everyweekend unless its raining hr>

Thought i saw ya over in Tahuya, but this Raptor didn't have all the flashy stuff yours does.

---

My raptor aint flashy its always dirty and rusty and all scratched up I ain't ridden much away from home besides the dunes since Dinger left I need to get out more.

---

Posted by: OneFlyCowboy

Quote

---

Originally posted by: 2mnyToyz

Quote

---

Originally posted by: HappaRap

Quote

---

Originally posted by: 2mnyToyz We're making a day trip to the chit-hole on saturday...
started putting the wheelie bar on the bike and discovered I won't have a flag mount. I have to take the grab bar off to put the wheelie bar on... I'll just leave it here this weekend.

---

Sorry to hear that, was hoping to hear of some great racing between you and that Rappy. Good Luck at the drags in Albany.

---

That's leaving the wheelie bar here this weekend... the bike is still going set-up with the shocks. Probably be gettin' my butt kicked by BigD because of not having the wheelie bar.

Who knows, I might figure out what to do before then...

---

Put the tank vent up your butt and fart on the launch! you'll take him no problem

---

Posted by: tencubed

GN PSAR

---

Posted by: MeIsCheech

Quote

---

Originally posted by: OneFlyCowboy

Quote

---

Originally posted by: 2mnyToyz

Quote

---

Originally posted by: HappaRap

Quote

---

Originally posted by: 2mnyToyz We're making a day trip to the chit-hole on saturday...
started putting the wheelie bar on the bike and discovered I won't have a flag mount. I have to take the grab bar off to put the wheelie bar on... I'll just leave it here this weekend.

---

Sorry to hear that, was hoping to hear of some great racing between you and that Rappy. Good Luck at the drags in Albany.

---

That's leaving the wheelie bar here this weekend... the bike is still going set-up with the shocks. Probably be gettin' my butt kicked by BigD because of not having the wheelie bar.

Who knows, I might figure out what to do before then...

---

Put the tank vent up your butt and fart on the launch! you'll take him no problem hr>

What if he Sharts? Does someone have to clear the tube with their mouth

---

Posted by: MeIsCheech

My memory is rusty but I think Karl got caught trying to blow something clear on an exhaust, black lips or something

---

Posted by: OneFlyCowboy

Quote

---

Originally posted by: MeIsCheech
My memory is rusty but I think Karl got caught trying to blow something clear on an exhaust, black lips or something

---

Karl puts his lips on hoses

---

Posted by: nwcutie

Michael and I went down to Reedsport Friday and spent the weekend - B E A U T I F U L weather at Winchester! 80 degrees and just a small breeze. We didn't take the quads tho, it wasn't that kind of trip. I sincerely wish it was. We went to say goodbye to my grandmother as she is terminal (cancer). There was a lot of family there - she is at home with hospice and surrounded by people that love her. We are still going down for Thanksgiving, but it will just be Grandpa, auntie and cousins then. She said she has enjoyed my quadding friends who have been down - Bill, Karl, Tammy, and Jacob have all had dinner at pizza rays with grandma and grandpa.

I would love to go to Beverly this weekend, but I am leading a team of students for the Curtis Junior High School MESA (math engineering science achievement) club at the Pierce County Hunger Walk on Sunday, October 1st. Check it out at www.hungerwalk.com, then send me a SPM if you would consider sponsoring our team. It's a great cause and a great bunch of kids too. I will be dragging the whole fam damily along too because we believe everyone should have enough to eat!

---

Posted by: nwcutie

tne,

my first husband was a union carpenter - drywall and metal stud framer. When we went to the union picnics, one of the things we noticed was that the guys who got their 20 year pins looked pretty f'ing old and crippled at about 40 years old. Guys who managed to make it 30 years were few and far between. It was a huge reality check! Scott knew there was no way he would make it to retirement and be physically intact. He stuck it out til he was vested (10 years), then found another profession. He's now manager of a resort in Minocqua Wisconsin!

---

Posted by: HappaRap

Quote

---

Originally posted by: 2mnyToyz

Quote

---

Originally posted by: HappaRap

Quote

---

Originally posted by: 2mnyToyz We're making a day trip to the chit-hole on saturday...
started putting the wheelie bar on the bike and discovered I won't have a flag mount. I have to take the grab bar off to put the wheelie bar on... I'll just leave it here this weekend.

---

Sorry to hear that, was hoping to hear of some great racing between you and that Rappy. Good Luck at the drags in Albany.

---

That's leaving the wheelie bar here this weekend... the bike is still going set-up with the shocks. Probably be gettin' my butt kicked by BigD because of not having the wheelie bar. Who knows, I might figure out what to do before then...

---

Ok, I understand now, must have been sucking in too much insulation, effected my brain cells BR>

---

Posted by: HappaRap

Good Morning PSAR

---

Posted by: Red400EXRod

Mornin' PSAR

Good middle of the night Happa!

---

Posted by: RancherATCrazy

Morning PSAR!

---

Posted by: Bing

good morning PSAR


TP

---

Posted by: RancherATCrazy

Mornin' Bing

---

Posted by: Bing

Quote

---

Originally posted by: RancherATCrazy
Mornin' Bing hr>

mornin Rancher!!

lookin like a kick butt day,,,again BR>

---

Posted by: RancherATCrazy

Quote

---

Originally posted by: Bing

Quote

---

Originally posted by: RancherATCrazy
Mornin' Bing hr>

mornin Rancher!!

lookin like a kick butt day,,,again hr>

Yeah, to bad I will spend it in the office

---

Posted by: tnemaloney

good mornin everyone ..... its kinda warm outside....looks like another nice day

---

Posted by: tnemaloney

Quote

---

Originally posted by: nwcutie
tne,

my first husband was a union carpenter - drywall and metal stud framer. When we went to the union picnics, one of the things we noticed was that the guys who got their 20 year pins looked pretty f'ing old and crippled at about 40 years old. Guys who managed to make it 30 years were few and far between. It was a huge reality check! Scott knew there was no way he would make it to retirement and be physically intact. He stuck it out til he was vested (10 years), then found another profession. He's now manager of a resort in Minocqua Wisconsin!

---

my hubbie started working when he was 14 as a hoddy helper, then went into framing and then/now sheetrock... he has been hanging for 16 yrs and has been union on and off 13 yrs but has been steady union the past 3 yrs...lol he doesnt make as much money in the union but he does get benefits

---

Posted by: OneFlyCowboy

Ive been sittin on my ass for 10+ years and Im pretty sure thats been harder on me than any physical labor could have been


GOOOOOOOOD MOOOOORNNINNg

---

Posted by: tnemaloney

i went out and cleaned my pond the other day (cause the pump wasnt working) and noticed one of my fish were missing well i went out this mornin and the other fish was on the ground i thought it was dead but when i touched it it was still alive lol so i put it back in the pond now why would it jump out does it have a death wish or what? lol

---

Posted by: tnemaloney

well that gives me an excuse to go to the fish store and buy another to keep that one company i think ill get a shubunkin this time

---

Posted by: OneFlyCowboy

Sounds to me like a raccoon raid.

---

Posted by: tnemaloney

Quote

---

Originally posted by: OneFlyCowboy
Sounds to me like a raccoon raid.

---

i thought that to but why was the other still there just on the ground lol

---

Posted by: OneFlyCowboy

Quote

---

Originally posted by: tnemaloney

Quote

---

Originally posted by: OneFlyCowboy
Sounds to me like a raccoon raid.

---

i thought that to but why was the other still there just on the ground lol

---

They got interupted duringg the raid and dropped it

---

Posted by: tnemaloney

lol could be the dogs when i first set the pond up here.. one of them tried to swim up the waterfall i think it thought it was a salmon lol

---

Posted by: OneFlyCowboy

Bump ski bump. im out in 1 hour.

---

Posted by: Red400EXRod

Happa has no voice mail!

---

Posted by: HappaRap

Try again Rod, I just spoke to him BR>
Val

---

Posted by: Red400EXRod

Quote

---

Originally posted by: HappaRap
Try again Rod, I just spoke to him BR>
Val

---

Just gonna yak!
He told me months ago he would set up his voice mail!

---

Posted by: HappaRap

Quote

---

Originally posted by: Red400EXRod

Quote

---

Originally posted by: HappaRap
Try again Rod, I just spoke to him BR>
Val

---

Just gonna yak!
He told me months ago he would set up his voice mail!

---

That would be my fault, I keep forgetting to do it for him, but then he would have to remember how to retrieve the message wouldn't he Hap doesn't program his phone at all, I think he just thinks it comes ready to go BR>
Val

---

Posted by: Red400EXRod

I'm trying to create a link in my sig, what am I doing wrong?

---

Posted by: Red400EXRod

Quote

---

Originally posted by: HappaRap

Quote

---

Originally posted by: Red400EXRod

Quote

---

Originally posted by: HappaRap
Try again Rod, I just spoke to him BR>
Val

---

Just gonna yak!
He told me months ago he would set up his voice mail!

---

That would be my fault, I keep forgetting to do it for him, but then he would have to remember how to retrieve the message wouldn't he Hap doesn't program his phone at all, I think he just thinks it comes ready to go BR>
Val

---

I figured you'd need to set it up for him. He needs one button retrieval

---

Posted by: tencubed

Quote

---

Originally posted by: HappaRap
Hap doesn't program his phone at all, I think he just thinks it comes ready to go BR>
Val

---

You mean they don't?

---

Posted by: 2mnyToyz

Quote

---

Originally posted by: Red400EXRod
I'm trying to create a link in my sig, what am I doing wrong?

---

attemting it yourself... you need val.

---

Posted by: tencubed

Good evening PSAR

Been "husband in tow" all day today. SWMBO and D-in-L have really put me thru the wringer. I was allowed to carry bags from nearly every store in Southcenter Mall and those stores within sight of said center.

I am now reposed in my recliner and intend to move only if Mother Nature sends an urgent message. How two women can travel that many miles and look at that much stuff and still be talking about the details of one dress or another from such and such a store truly amazes me.

In all truth it has been a great day. Good stuff watching my girls have fun.

---

Posted by: 2mnyToyz

L=Son's Band]http://www.amsession.com[/L]

add a [ to the beginning...

---

Posted by: Red400EXRod

Quote

---

Originally posted by: 2mnyToyz

Quote

---

Originally posted by: Red400EXRod
I'm trying to create a link in my sig, what am I doing wrong?

---

attemting it yourself... you need val. hr>

I know, but she's not here now

---

Posted by: Red400EXRod

Quote

---

Originally posted by: 2mnyToyz
L=Son's Band]http://www.amsession.com[/L]

add a [ to the beginning...

---

Doesn't work

---

Posted by: 2mnyToyz

does the link in my sig work?

---

Posted by: Red400EXRod

Quote

---

Originally posted by: 2mnyToyz
does the link in my sig work?

---

Yes

---

Posted by: MeIsCheech

Yes it does

---

Posted by: 2mnyToyz

Quote

---

Originally posted by: Red400EXRod

Quote

---

Originally posted by: 2mnyToyz
L=Son's Band]http://www.amsession.com[/L]

add a [ to the beginning...

---

Doesn't work

---

If the link in my sig works, then add the url I posted above and add a bracket to the beginning.

---

Posted by: 2mnyToyz

Quote

---

Originally posted by: MeIsCheech
My memory is rusty but I think Karl got caught trying to blow something clear on an exhaust, black lips or something

---

What happens at the dunes... stays at the dunes!

---

Posted by: MeIsCheech

---

Posted by: Red400EXRod

THANKS 2mny!

---

Posted by: MeIsCheech

Quote

---

Originally posted by: 2mnyToyz

Quote

---

Originally posted by: MeIsCheech
My memory is rusty but I think Karl got caught trying to blow something clear on an exhaust, black lips or something

---

What happens at the dunes... stays at the dunes!

---

We just won't ask Dan about the Casino Bar

---

Posted by: MeIsCheech

So 7am Saturday North Bend McD's?

---

Posted by: 2mnyToyz

---

Posted by: 2mnyToyz

Quote

---

Originally posted by: MeIsCheech
So 7am North Bend McD's

---

Can I navigate the parking lot with my truck and a 20' trailer?

---

Posted by: MeIsCheech

Well my 12hr day is coming to a close, gotta head home and check out the new Dirt Wheels, something bout a red Kymco tearing thru the mud in Beverly

---

Posted by: Red400EXRod

Quote

---

Originally posted by: 2mnyToyz

Quote

---

Originally posted by: MeIsCheech
So 7am North Bend McD's

---

Can I navigate the parking lot with my truck and a 20' trailer?

---

If you can't, you shouldn't be driving!

---

Posted by: MeIsCheech

Quote

---

Originally posted by: 2mnyToyz

Quote

---

Originally posted by: MeIsCheech
So 7am North Bend McD's

---

Can I navigate the parking lot with my truck and a 20' trailer?

---

Yes EZ, they have a huge lot between Chevron and McD's, I even think that U could fit thru the drive thru

---

Posted by: Red400EXRod

Quote

---

Originally posted by: MeIsCheech
Well my 12hr day is coming to a close, gotta head home and check out the new Dirt Wheels, something bout a red Kymco tearing thru the mud in Beverly

---

Nice shot of Jakie Boy!

---

Posted by: MeIsCheech

I think they accomomadate s/p to the sledders and their rigs in the winter

---

Posted by: MeIsCheech

Quote

---

Originally posted by: Red400EXRod

Quote

---

Originally posted by: MeIsCheech
Well my 12hr day is coming to a close, gotta head home and check out the new Dirt Wheels, something bout a red Kymco tearing thru the mud in Beverly

---

Nice shot of Jakie Boy!

---

Thats it I'm heading home to check it out! See U all Sat. Rod ur showing up too?

---

Posted by: MeIsCheech

And we all need to start twisting Happa's arm, Come on trailer dancer, Beverly is calling U!

---

Posted by: Red400EXRod

Quote

---

Originally posted by: MeIsCheech

Quote

---

Originally posted by: Red400EXRod

Quote

---

Originally posted by: MeIsCheech
Well my 12hr day is coming to a close, gotta head home and check out the new Dirt Wheels, something bout a red Kymco tearing thru the mud in Beverly

---

Nice shot of Jakie Boy!

---

Thats it I'm heading home to check it out! See U all Sat. Rod ur showing up too?

---

I don't think so, my Pirate Bike is too affraid of them drag bikes!

---

Posted by: 2mnyToyz

Quote

---

Originally posted by: Red400EXRod

Quote

---

Originally posted by: 2mnyToyz

Quote

---

Originally posted by: MeIsCheech
So 7am North Bend McD's

---

Can I navigate the parking lot with my truck and a 20' trailer?

---

If you can't, you shouldn't be driving!

---

Easy there buckaroo... I don't recall what that parking looks like.


on a side note:
It's nice you don't need a CDL to drive 62' of chit down the freeway. Without regard to weight of the vehicle or the driver's ability...

---

Posted by: 2mnyToyz

Quote

---

Originally posted by: Red400EXRod

Quote

---

Originally posted by: MeIsCheech

Quote

---

Originally posted by: Red400EXRod

Quote

---

Originally posted by: MeIsCheech
Well my 12hr day is coming to a close, gotta head home and check out the new Dirt Wheels, something bout a red Kymco tearing thru the mud in Beverly

---

Nice shot of Jakie Boy!

---

Thats it I'm heading home to check it out! See U all Sat. Rod ur showing up too?

---

I don't think so, my Pirate Bike is too affraid of them drag bikes!hr>

wuss

---

Posted by: Quad4Fun

Quote

---

Originally posted by: Red400EXRod

Quote

---

Originally posted by: MeIsCheech
Well my 12hr day is coming to a close, gotta head home and check out the new Dirt Wheels, something bout a red Kymco tearing thru the mud in Beverly

---

Nice shot of Jakie Boy!

---

Sweet, I thought that was him when I looked through it this weekend img src="i/expressions/face-icon-small-happy.gif" border="0">BR>Good for him, the kids love it when there pictures get posted.
That is the best section of any magazine out there......

It's Ash's favorite magazine.
I'm told Ashley will be especially happy with December's issue img src="i/expressions/face-icon-small-happy.gif" border="0">BR>A little mouse told me it will be pretty cool for her img src="i/expressions/face-icon-small-happy.gif" border="0">
Something about some pics in the Dunefest article img src="i/expressions/face-icon-small-happy.gif" border="0">BR>
Ken (dsxbear) and his son Aaron have a nice pic of them in the November issue.
It's the picture in the section where the are talking about all the Dune riding areas
img src="i/expressions/face-icon-small-happy.gif" border="0">img src="i/expressions/face-icon-small-happy.gif" border="0">

---

Posted by: LdyJay

Rod, SPM.

---

Posted by: OneFlyCowboy

Rod.. Im diggin the mellow groove

---

Posted by: Red400EXRod

Quote

---

Originally posted by: OneFlyCowboy
Rod.. Im diggin the mellow groove hr>

Thanks, I think they're really good, but I'm biased!
"Weight of the World " was written for his brother, in Iraq!
Track 9 on the CD is called "Angel or Devil" and it is really good!
Fox Sports is contemplating using one of the songs for their BCS promos!
Buy the CD on cdbaby.com. You can link from his site.

---

Posted by: HappaRap

Quote

---

Originally posted by: Red400EXRod

Quote

---

Originally posted by: 2mnyToyz

Quote

---

Originally posted by: Red400EXRod I'm trying to create a link in my sig, what am I doing wrong?

---

attemting it yourself... you need val. hr>

I know, but she's not here nowhr>

Is there something I should know, when is she there? Guess it's time me and Cindy have a little chat BR>

---

Posted by: TractorPacker

Quote

---

Originally posted by: OneFlyCowboy
Rod.. Im diggin the mellow groove hr>

56k

---

Posted by: TractorPacker

Quote

---

Originally posted by: Bing
good morning PSAR


TP

---

Don't know what's better the booby gnome or the arrow in head gnome.

---

Posted by: TractorPacker

Quote

---

Originally posted by: 2mnyToyz


on a side note:
It's nice you don't need a CDL to drive 62' of chit down the freeway. Without regard to weight of the vehicle or the driver's ability...

---

That keeps me awake at night.

---

Posted by: HappaRap

Quote

---

Originally posted by: MeIsCheech And we all need to start twisting Happa's arm, Come on trailer dancer, Beverly is calling U!

---

I volunteered to work Friday night and Saturday before the Beverly trip came up moving a new employee to Oregon, believe me, I'd love to go.

---

Posted by: TractorPacker

I (we) rode the trail ready 300ex tonight. It moves to its new home tomorrow.

It is looking like the house deals close Thursday. If they do, we move friday, saturday and Sunday.


BUT I get fourwooler cash. Gonna pimp my rides.

---

Posted by: OneFlyCowboy

Quote

---

Originally posted by: TractorPacker

Quote

---

Originally posted by: OneFlyCowboy
Rod.. Im diggin the mellow groove hr>

56k

---

Dayum.. you on dialup

---

Posted by: OneFlyCowboy

Quote

---

Originally posted by: TractorPacker

Quote

---

Originally posted by: 2mnyToyz


on a side note:
It's nice you don't need a CDL to drive 62' of chit down the freeway. Without regard to weight of the vehicle or the driver's ability...

---

That keeps me awake at night.

---

you aint the only one

---

Posted by: tencubed

Quote

---

Originally posted by: OneFlyCowboy

Quote

---

Originally posted by: TractorPacker

Quote

---

Originally posted by: 2mnyToyz


on a side note:
It's nice you don't need a CDL to drive 62' of chit down the freeway. Without regard to weight of the vehicle or the driver's ability...

---

That keeps me awake at night.

---

you aint the only one hr>

And scares the keerap out of me every time I see one wobbling down the freeway.

---

Posted by: tencubed

GN PSAR

---

Posted by: Bing

Quote

---

Originally posted by: TractorPacker

Quote

---

Originally posted by: 2mnyToyz


on a side note:
It's nice you don't need a CDL to drive 62' of chit down the freeway. Without regard to weight of the vehicle or the driver's ability...

---

That keeps me awake at night.

---

it causes me to leave a day early and stay a day late on holiday weekends

---

Posted by: Red400EXRod

Mornin' PSAR

---

Posted by: Red400EXRod

Quote

---

Originally posted by: HappaRap

Quote

---

Originally posted by: Red400EXRod

Quote

---

Originally posted by: 2mnyToyz

Quote

---

Originally posted by: Red400EXRod I'm trying to create a link in my sig, what am I doing wrong?

---

attemting it yourself... you need val. hr>

I know, but she's not here nowhr>

Is there something I should know, when is she there? Guess it's time me and Cindy have a little chat hr>

Nah, you're tall but so much still goes over your head

---

Posted by: HappaRap

Good Morning PSAR

---

Posted by: Red400EXRod

HAPPA!

---

Posted by: xFreebirdx

Good Morning PASR. =]

---

Posted by: warriorqueen

Morning PSAR!

TP where's the picture of the new home? Congrats to both you and RG! That's got to be exciting.

---

Posted by: slomoe

GOOD MORNING PSAR!

---

Posted by: tnemaloney

Quote

---

Originally posted by: TractorPacker
I (we) rode the trail ready 300ex tonight. It moves to its new home tomorrow.

It is looking like the house deals close Thursday. If they do, we move friday, saturday and Sunday.


BUT I get fourwooler cash. Gonna pimp my rides.

---

i feel for you i hate to move and pack lol

---

Posted by: RaptorRandy27

Quote

---

Originally posted by: Red400EXRod

Quote

---

Originally posted by: HappaRap

Quote

---

Originally posted by: Red400EXRod

Quote

---

Originally posted by: 2mnyToyz

Quote

---

Originally posted by: Red400EXRod I'm trying to create a link in my sig, what am I doing wrong?

---

attemting it yourself... you need val. hr>

I know, but she's not here nowhr>

Is there something I should know, when is she there? Guess it's time me and Cindy have a little chat hr>

Nah, you're tall but so much still goes over your headhr>

LMAO

---

Posted by: tnemaloney

good mornin everyone........ hubbie is back at work the chiropractor send him back with no limitations

---

Posted by: RaptorRandy27

Mornin PSAR

---

Posted by: tnemaloney

ok where would i look to find a front end for an 88 chevy truck? i would like to get it back together

---

Posted by: Bing

Quote

---

Originally posted by: tnemaloney
good mornin everyone........ hubbie is back at work the chiropractor send him back with no limitations

---

wow,,,thats good to hear!!

---

Posted by: tnemaloney

Quote

---

Originally posted by: Bing

Quote

---

Originally posted by: tnemaloney
good mornin everyone........ hubbie is back at work the chiropractor send him back with no limitations

---

wow,,,thats good to hear!!

---

i was supprised that he could go back already......he couldnt even move on friday now hes all good

---

Posted by: Bing

Quote

---

Originally posted by: tnemaloney

Quote

---

Originally posted by: Bing

Quote

---

Originally posted by: tnemaloney
good mornin everyone........ hubbie is back at work the chiropractor send him back with no limitations

---

wow,,,thats good to hear!!

---

i was supprised that he could go back already......he couldnt even move on friday now hes all good

---

only 2 others I know that could do something like that

superman and OFC BR>

---

Posted by: OneFlyCowboy

mornin

---

Posted by: OneFlyCowboy

Quote

---

Originally posted by: Bing
\
only 2 others I know that could do something like that

superman and OFC hr>

img src="i/expressions/face-icon-small-happy.gif" border="0">img src="i/expressions/face-icon-small-happy.gif" border="0">img src="i/expressions/face-icon-small-happy.gif" border="0">One in the same aren't they

---

Posted by: tnemaloney

Quote

---

Originally posted by: Bing

Quote

---

Originally posted by: tnemaloney

Quote

---

Originally posted by: Bing

Quote

---

Originally posted by: tnemaloney
good mornin everyone........ hubbie is back at work the chiropractor send him back with no limitations

---

wow,,,thats good to hear!!

---

i was supprised that he could go back already......he couldnt even move on friday now hes all good

---

only 2 others I know that could do something like that

superman and OFC hr>

oh didnt i tell you my hubbie is supermen

---

Posted by: OneFlyCowboy

Quote

---

Originally posted by: tnemaloney


oh didnt i tell you my hubbie is supermen hr>

Can He fly? Cuz I can fly

---

Posted by: Bing

Quote

---

Originally posted by: tnemaloney

Quote

---

Originally posted by: Bing

Quote

---

Originally posted by: tnemaloney

Quote

---

Originally posted by: Bing

Quote

---

Originally posted by: tnemaloney
good mornin everyone........ hubbie is back at work the chiropractor send him back with no limitations

---

wow,,,thats good to hear!!

---

i was supprised that he could go back already......he couldnt even move on friday now hes all good

---

only 2 others I know that could do something like that

superman and OFC hr>

oh didnt i tell you my hubbie is supermen hr>

plural?

---

Posted by: Bing

Quote

---

Originally posted by: OneFlyCowboy

Quote

---

Originally posted by: tnemaloney


oh didnt i tell you my hubbie is supermen hr>

Can He fly? Cuz I can fly hr>

be sure to mention that on tuesday nights BR>

---

Posted by: tnemaloney

well we dont all fly the same way lol but ya sometimes lol

---

Posted by: tnemaloney

he flys off the handle now and then he can also flip flip his lid lol

---

Posted by: OneFlyCowboy

Quote

---

Originally posted by: Bing


be sure to mention that on tuesday nights hr>

Thursday nights and No problem I will

---

Posted by: LdyJay

Wingy, HondaBlue, Southbound 10 min.

---

Posted by: Bigdaddy660R

Quote

---

Originally posted by: Bing
only 2 others I know that could do something like that

superman and OFC hr>

Ghosh Dang and here I thought they where one and the same.............

O-Wait I Got it Duckman=OneFlyPOSTHO...........BR>

---

Posted by: tencubed

Good Afternoon PSAR

tne got the old man out of the house (did he fly to work?), OFC is still doing the third person thing, Happa is being picked on (again ), TP is enjoying the "Adventure in Moving" thing, Bing is doing his thing, LJ offers an update and it's not even evening yet. Active little site today.

Did any of you good folks know that Slime has a bad taste?

---

Posted by: OneFlyCowboy

Quote

---

Originally posted by: Bigdaddy660R

Quote

---

Originally posted by: Bing
only 2 others I know that could do something like that

superman and OFC hr>

Ghosh Dang and here I thought they where one and the same.............

O-Wait I Got it Duckman=OneFlyPOSTHO...........hr>

What you talkin about willis!!!

---

Posted by: Duckmen

Quote

---

Originally posted by: Bigdaddy660R

Quote

---

Originally posted by: Bing
only 2 others I know that could do something like that

superman and OFC hr>

Ghosh Dang and here I thought they where one and the same.............

O-Wait I Got it Duckman=OneFlyPOSTHO...........hr>

I will take offense to this on two levels!!! 1 OFC is a spazz. and 2 YOU CAN't SPELL

---

Posted by: OneFlyCowboy

Anyone want to fund me to get a helicoptor pilots liscense? I could Fly the quad to the dunes

---

Posted by: tnemaloney

Quote

---

Originally posted by: tencubed
Good Afternoon PSAR

tne got the old man out of the house (did he fly to work?), OFC is still doing the third person thing, Happa is being picked on (again ), TP is enjoying the "Adventure in Moving" thing, Bing is doing his thing, LJ offers an update and it's not even evening yet. Active little site today.

Did any of you good folks know that Slime has a bad taste?

---

well he went flyin out the door this mornin he was runnin late lol
and i havent ever tasted slime but ill take your word on it

---

Posted by: OneFlyCowboy

Quote

---

Originally posted by: tencubed


Did any of you good folks know that Slime has a bad taste?

---

Umm.. I don't figure its recomended for human consumption.. your like a kid with the glue bottle TC

---

Posted by: OneFlyCowboy

Quote

---

Originally posted by: Duckmen


I will take offense to this on two levels!!! 1 OFC is a spazz. and 2 YOU CAN't SPELL hr>

HEY!!! You will Not talk to your superiors like that DUCKY!!! Don't make me put you on leave of absense withouth compensation!!!

---

Posted by: Duckmen

Quote

---

Originally posted by: OneFlyCowboy

HEY!!! You will Not talk to your superiors like that DUCKY!!! Don't make me put you on leave of absense withouth compensation!!!

---

Whatever OFC.. You couldn't hurt me if you wanted to. Your to fat to catch me. and I'll sue you if you try and send me outta work without pay!!!

---

Posted by: tencubed

Quote

---

Originally posted by: OneFlyCowboy

Quote

---

Originally posted by: tencubed


Did any of you good folks know that Slime has a bad taste?

---

Umm.. I don't figure its recomended for human consumption.. your like a kid with the glue bottle TC hr>

Did I fail to mention the part about the little tube popping off the pump? Wife and lazy dog both thought it was funny.

---

Posted by: OneFlyCowboy

Quote

---

Originally posted by: Duckmen


Whatever OFC.. You couldn't hurt me if you wanted to. Your to fat to catch me. and I'll sue you if you try and send me outta work without pay!!!

---

WTF. you fruitloop.. get back to work.

---

Posted by: OneFlyCowboy

Quote

---

Originally posted by: tencubed
[
Did I fail to mention the part about the little tube popping off the pump? Wife and lazy dog both thought it was funny.

---

I sure hope your talkin about a transfer pump for the slime and not a P**** pump either way i don't figure the discharge would be pleasant

---

Posted by: tencubed

Quote

---

Originally posted by: OneFlyCowboy

Quote

---

Originally posted by: tencubed
[
Did I fail to mention the part about the little tube popping off the pump? Wife and lazy dog both thought it was funny.

---

I sure hope your talkin about a transfer pump for the slime and not a P**** pump either way i don't figure the discharge would be pleasant hr>

Only the One Fly mind would venture there. I feel great compassion and sympathy for the Duckmen. The tube was, of course, attached to the Slime transfer pump. If you purchase this setup be sure the little tie rap tube clamp is tight prior to using it.

---

Posted by: OneFlyCowboy

Quote

---

Originally posted by: tencubed


Only the One Fly mind would venture there. I feel great compassion and sympathy for the Duckmen. The tube was, of course, attached to the Slime transfer pump. If you purchase this setup be sure the little tie rap tube clamp is tight prior to using it.

---

I have one of them lil brake bleeder jobbies and I thought the clamp went by the check valve and it fell off and i squirted brake fluid all over

---

Posted by: tencubed

Quote

---

Originally posted by: OneFlyCowboy

Quote

---

Originally posted by: tencubed


Only the One Fly mind would venture there. I feel great compassion and sympathy for the Duckmen. The tube was, of course, attached to the Slime transfer pump. If you purchase this setup be sure the little tie rap tube clamp is tight prior to using it.

---

I have one of them lil brake bleeder jobbies and I thought the clamp went by the check valve and it fell off and i squirted brake fluid all over hr>

Yup, complicated equipment does tend to test the limits of one's abilities. Remind me to show you my hay hook scar sometime.

---

Posted by: OneFlyCowboy

Quote

---

Originally posted by: tencubed

Yup, complicated equipment does tend to test the limits of one's abilities. Remind me to show you my hay hook scar sometime. hr>

what the heck... did you fall or grab backwards and have a rebound into your arm?

---

Posted by: RancherATCrazy

Quote

---

Originally posted by: OneFlyCowboy
Anyone want to fund me to get a helicoptor pilots liscense? I could Fly the quad to the dunes hr>

You should just concentrate on keeping you drivers license

---

Posted by: RancherATCrazy

Quote

---

Originally posted by: OneFlyCowboy

Quote

---

Originally posted by: Duckmen


I will take offense to this on two levels!!! 1 OFC is a spazz. and 2 YOU CAN't SPELL hr>

HEY!!! You will Not talk to your superiors like that DUCKY!!! Don't make me put you on leave of absense withouth compensation!!!

---

CRACK!!!

LOL

---

Posted by: RancherATCrazy

Quote

---

Originally posted by: Duckmen

Quote

---

Originally posted by: OneFlyCowboy

HEY!!! You will Not talk to your superiors like that DUCKY!!! Don't make me put you on leave of absense withouth compensation!!!

---

Whatever OFC.. You couldn't hurt me if you wanted to. Your to fat to catch me. and I'll sue you if you try and send me outta work without pay!!!

---

LMAO

---