Pages: 1
Posted by: TORK
Pull fuel line off at carb and make sure that you have good flow to carb. If so then you have jets plugged up and carb will have to be pulled and cleaned. Could be debris in jet or even water in fuel ( water is denser than gas and will plug off a jet like a fuel shtoff.
P.S. I hope by starting fluid you don't mean ether.
Posted by: FranktheTank76
Hello, I have a 2005 Grizz and is not getting any gas. It turns over and runs with starting fluid sprayed into the carb.
Any ideas what's wrong? Fuel filter, frozen line????
P.S. Yes there is gas in the tank.
Thanks
Posted by: FranktheTank76
Hey, Thanks for the help Tork. There was gas flowing through the line to the carb, so must be something plugged in the carb. I'm going to tkae the carb of tonight and clean it.
What's the deal with ether?
