ATV Connection Magazine

Bear Will Not Start

(Click here to view the original thread with full colors/images)




Pages: 1


Posted by: JohnO

Definitely try replacing the spark plug. My Cat 500i did the same thing. Was running fine, left it parked for a few days, and it just wouldn't start. Spluttered, popped, but wouldn't start. I replaced the plug, and it fired right up. Darned if I could see anything wrong with the old plug...

My 96 Bear, on the other hand, also quit running this summer after running poorly for a day, but it turned out to be crud in the carb float bowl.







Posted by: BuckMark

I have a '01 4x4 that will not start. I drained the gas thinking what I put in was old but it will still not start. It hits only once or twice in a five second starting try. It is like it is not firing at all. I am going to replace the spark plug next. It was running fine and then just would not crank. Any suggestions?

Posted by: BuckMark

New plug did the trick but the old one looked fine. Go figure, just a little black around the business end.