Pages: 1
Posted by: Rudedog
With the lid off you should be running "lean". I'd re-jet or put the lid back on to be safe. When my Banshee was stock with the lid on I ran 210 mains, lid off, K & N, reeds it runs with 310 mains. The difference on a completely stock ATV with just the lid off probably isnt huge, but I'd image it's got to be running lean in the middle & top.
Rude Dog
Posted by: SANDMAN430
it is ok just remove the water drain so any sand can flow out.
Posted by: raptor03
I ride with no airbox and it never gets thru(sand).......
Posted by: BlackWidow
One of the best upgrades when riding in the sand is an Outerwear. Keeps most of the sand off the filter and especially out of foam filters. I run K&N and feel that it does a better job of keeping sand out of my engine. I would think that sand will eventually work through a foam filter.
At the very least, look at an outerwear. About 15 bucks I think.
Posted by: FarmStud
Ya take it off, just make sure the air filter and carb boot is seated good. Sand will get everywhere anyway, so just make sure you wash it good after every ride in the sand.
Posted by: witti
I also ride with out a lid, no signs of sand getting in carb.
Might want to rejet it though, Might not hurt anything without jetting, other then performance.
Posted by: YFZn
Apple, if you are still nervous, I know GYT-R has a duel stage foam filter. That would add a little extra protection as well.
Posted by: applepie
HEY JUST GOT A NEW YFZ450 AND ITS MY FISRT TIME OUT IN THE SAND....IS IT OK TO TAKE THE AIR BOX LID OFF IF YOUR SAND RIDING? I DONT WANT TO F@#$ IT UP BEEING IT ONLY HAS 3 HOURS ON IT...THANKS
Posted by: applepie
i think im going to take it to sparks and have them do the mods on it..i was going to do there pipe any way so i might as well just leave it with them and have it all done by some one who knows what there doing..if i leave it to me to do ..i might blow it up...lol...
