Pages: 1
Posted by: powerstroke01
Hows it run?
Posted by: xljimmy
I have put together a go-kart with a front end of a blaster. I had to widen the arm apart to make room for feet but turned out good. The front wheel bearings are shot though and I cant get the hubs of the spindles. As far as I know they should just come off once the spindle castle nut is removed. Never took the hubs off of any quad that I remember and would just like to make sure nothing else is there before I start beating it off. My guess would be a metal tube between bearings that is rusted on the spindle. Anybody know if it should just come off or not? Maybe pressed? Thanks
I included some pictures and a small video if anybodys curious about it.
Video wont work. Tell me how to make it work if you want to see it.
Posted by: xljimmy
ok, got them off. Rusted on. Had to get the bfh and hammer them off.
Posted by: xljimmy
Runs well, geared for lots of power. Will drag an adult around with ease. It tops out like 40mph maybe 45. Rides beautiful. Been a blast.
Specifications are
16hp Honda clone
21ft/lbs of torque
electric start
comet 40 tav
blaster front has 7.2" front wheel travel
Swingarm Has 6.5" rear wheel travel
