Pages: 1
Posted by: hondabuster
The rims will need the common honda bolt pattern, 4-110mm. But if you have to buy the rims new, you may be better off having tires with them too.
27 inchers are going to be a big load on that little 350, its doable, but you probably wont like the results.
You can look on ebay, or you can check rocky mountainatv or dennis kirk for new rims.
The rims off of most of the bomb utes were 110 and 12 inchers. The rubicon and rincon both use 12 inchers, foremans of 450cc and up use those rims too,and would likewise be the correct pattern. The eiger, big bear, kodiak, wolverine have the 12 inch rims, and the correct pattern, but im not sure if the offsets will be ok.
Posted by: trxman03
A friend has just given me a set of mudlite tires he wasent useing, the tires are 27/12/12 & 27/10/12. I know these are not the ideal size for my 03 honda 350 4X4, but my stock tires are shot, and these were free. The typ of rideing i do (trail & back roads) i might not notice a huge lose of power aneyway. My question is would stock rims off a 450 honda fit these tires? And if not, what stock rims would fit them, and still bolt on my bike? Thanks for the help!!
