Pages: 1
Posted by: FMF
You have to tighten up your axle nuts
Posted by: FMF
Yes they are rite next to the Sprocket.
Posted by: WyoDuner
Unless you happen to have a really big wrench you will probablyhave to use a pipe wrench to tighten them down. The torque spec is very high on them - I forget but it's around 140 ft/lbs. If your Banshee is fairly new you should check all the bolts, especially the ones on the rear spindles.
Posted by: 2002bansheeman350
i have a 03 banshee,i just got it in august and dont have much money to spend on it. As i was out riding I noticed a snapping coming from the chain, i figered that it might becouse the chain was to tight. when i was done i started to play around with it and noticed that i could push my sprocket back and forth. SOmone must of had this problem if anyone has any info on this please let me know.
Posted by: 2002bansheeman350
oh, couse my dad started to talk all this junk about how i striped my axle and every thing. thanx tho ill do that tommorow. the axle nuts are rite next to the sprocket rite
