Pages: 1
Posted by: bpace
Last Ripoff(Rebel) used to before they went belly up. Someone on here said that you could get such a beast from CT. I built both of mine myself and if you plan on going that route plan on about $15,000 for a top notch bike.
Posted by: bpace
You probably have found what Last Rebel was selling. It was a Lonestar frame with the Rotax motor for $15,000. Last Rebel and Lonestar are two completely different companies. Lonestar is still in business and Last Rebel is not. You might give Lonestar a call but I don't believe you can still get what you have found.
Posted by: bpace
I have never seen one other than in the mags. The GNCC results are posted at www.racerxill.com. Just follow the links to the GNCC page. The series is currently on summer break and will not start back until the end of August in Fairmont, WV.
Posted by: THEXOTIC1
Gas Gas GNU was the only company i have heard of making an MX race ready bike. Do a search online u will find pics at the gasgas site. Also cannondale said that their new bike will be race ready out of the crate. But we will see
Posted by: blaster18
it the quad your talking about is a Rebal Star Pro Quad that cost anywhere from like 14,000 higher. Yes they still sell them.
Posted by: Banshee_16
I think it was Last Rebel Racing. It was a rotax powered 250r.
Posted by: fmfblaster
yeah there is a 250 that is based on a 250r honda that has a rotex motor in it and is avaiable from trinity
Posted by: WOODRIDER400
I have no idea, I haven't heard of a company selling full 250r's, I know you can get the chassis and everything else. Then you have to find an engine. Everything aftermarket, if you get the good stuff will cost a lot of money.
Posted by: WOODRIDER400
Do any of the major Racing outfits build complete engines for sale, or do you have to still go find one and get it run through?
Posted by: stevie
I cant think of it it was in a dirtwheels when they had all the sport modi;s in it. It was like 12000 though
Posted by: Trx440
Call CT Racing [562] 945-2453. Allen Knowles [owner] had a "new" 330R for sale back in November which he said he would sell for $10,000. It had an Arens frame with TCS suspension [CT owns TCS]. Every part on the bike was aftermarket. I'm not sure if Allen builds these bikes on request but money talks. Give 'em a call. If you've got a 400EX send him the engine. He'll build you a 42-43hp bike that SCREAMS!! I wouldn't trade mine for anything. However it would be alot cheaper to buy a complete bike at $10,000 than to build a 400EX properly.
Posted by: ridzhard
From what I have read/heard, last rebel racing was not a very good outfit and screwed a lot of people over. I also heard the quad was not that good. Bpace, have you seen one in action? Also, what is the word from the Team Green Camp? I have been looking in the results column to try and figure out who you are. I must be looking in the wrong places. The mags I get don't post too much in the way of results. Where else are they posted?
Posted by: dondiesel8
my friend said it would cost like $25,000 to buy (or build) a race ready 250r, sounds like a lot of money to me....
Posted by: justracnforfun
I know that I read somewhere that there is an aftermarket company selling race ready 250r's. Does anyone know which one it was?
Posted by: justracnforfun
I found it. It is made by LoneStar. It is 15,000 delivered with pep's all the way around. Do you know if this is the same quad that last rebel built? It last rebel the same as lonestar now? They say it is a stock rotax 250 with nothing done to it. About 50 hp. Pretty impressive for stock! Does anyone have one of these machines?
Posted by: JustinTBlazer
Rebel Star used to sell race ready quads. i think they are in business any more though. Cannodale will have a race quad once they release the fx400.
Posted by: 250Racer
Buy a ProTrax frame from Leager, rolling chassis, and get a 250R motor of a sort, CR or TRX and get to work. Rotax, keep them in sleds thats where they belong. Roll Design has a nice frame setup for around 7,500. Good luck hunting.
