Pages: 1
Posted by: Daren420
My last Banshee 4.87 @ 63 mph at Bonne Terre, MO. no wheelie bar. no extended swingarm. Only non-stock items (besides engine components) were 21x12x10 Padla brats and a DuraBlue lowering block in the rear.
My new Banshee . . . to be determined
My DS 650 . . . to be determined
Posted by: Daren420
Suzukiz400girl22,
Bonne Terre:
From Festus take 67 south. It is the Bonne Terre exit with the Dairy Queen. After exiting, turn left (east) and immediately after the 67 North on-ramp, you'll need to hang another left. Drive straight back and follow the sandy road. Can't miss it.
Daren
P.S. We ride at St. Joe every weekend we can. Also, PowerJunkie and I will be racing at Bonne Terre this year. He will surely be there more often than I will.
Posted by: Bubba297
5.23 at 61mph with a 1.91 60ft time. Crappy little 8 paddle sand tires. Another good point to state would be whether or not the bike has extended swingarm or wheelie bar. Mine was stock swingarm no wheelie bar.
Posted by: maddog56
I wanted to start a thread for posting 300' times.
6.24 here w/ pipe
Posted by: maddog56
6.24 at 56mph w/ pipe and K&n, stk swingarm, 20" 10 paddle extremes, no wheelie bar
Posted by: maddog56
Wow, these times all seem pretty fast. There is a well built quadzilla w/ a drag pipe running at my local track and the best he seems to manage is 5.4 sec. How are the sand conditions where you race? Do you use pro lights on a tree like us, or a flag man or staged lights? There are 600-1000cc snomobile engined banshees running 3.9 at absolute best at my track. Track record is 3.2 or something by a top fuel sand dragster.
Posted by: dragracer789
5.46 at 56MPH on that run.(250R) Pipe, filter, jetting. little gearing, everything COMPLETLY stock other than that. (look on my page for the time slip)
Posted by: dragracer789
^^^ What about your R , and how much did that light wieght chassie cost.?
Posted by: DaBeechMan
4.02-banshee
Posted by: DaBeechMan
R has only been on the track once, it went a 4.2 on its first pass
You'll pay a lot for a Ti chassis. Im not at liberty to say how much though.
Posted by: DaBeechMan
The tracks we run at are ASDA events. We use portatree pro lights. You guys have west michigan over there. Thats a fast track and i know of many banshee's that run in the 3's
Posted by: POLARISFREAK
5.55 @ 55 mph with stock swingarm and 22-11-8 8 paddle extreme haulers, no wheelie bar!
Posted by: 401
5.23 on dirt with stock swingarm and wheelie bar.Leaves hard but unloads the tires when the bar hits.
Posted by: 344PV
i heard the old 300' track behind the glamis beach store was open last month. not sure if it still is.
Posted by: bansheeesmoker
whare can I get timed in cali?
Posted by: badcompanyracing
Banshee-4.66 on dirt, no wheelie bar, +4 swingarm. stock stroke on gas, stock frame, stock ignition, stock carbs
Polaris-5.44 on dirt, stock swingarm with wheelie bar, but should be faster after i put it back together(5.20 maybe???)
Posted by: pimp250r
Quote
Originally posted by: DaBeechMan
4.02-banshee
...4.01 - R
BR>
j/k
i'll let you know as soon as I find sand! :-)
Posted by: WhiteZRacer
5.78 with stock swingarm and stock tires(I was racing on dirt), without a wheelie bar.
-------------------------
Z-400
W/B Full Exhaust
Powerfilter
13 Tooth
ITP Baja Wheels
Shock Covers
DRZ Base Gasket
Posted by: Suzukiz400girl22
Hey I was wondering if anyone here knew how to get to bonne terre, they are holding drags there and I was wondering if anyone was going or knew how to get to the sand drags. thanks
