Pages: 1
Posted by: WIDELOAD
580CC SUPERIOR SLEEVE MOTOR....BANSHEE 4.00'S......METHANOL......
TIM
Posted by: dsmike
i have ran 4.9 and pretty sure it will do 4.8's now. i run on a track that everyone else claims is 2 tenths slower than the other tracks in the area. i will travel alittle farther this year and find out. if they are alittle faster at the other tracks the drive will be wroth it.
Posted by: dsmike
i'm not for sure if they are a stage 4. lol
i have a custom stage 2.
where did you sand race at? i run at atoka. do you ride at Little Sahara?
Posted by: dsmike
i will be there for the 1st test-n-tune. i use to have a 400 with HPD porting on alky. i never got it dialed in.
Posted by: dsmike
pro 1 is 4.99 and quicker
pro 2 is 5.00- 6.00(i think)
i do not do the bracket thing. i only go down on the friday befroe.
the moose would be able to help you out there.
a 5.20 is very fast. not many bikes can run that there. most ported alky banshee run 4.9's to 5.0's.
what has you quad ran there? my 400 never ran right. not for sure why. i gave up on it and got a banshee. the guy that bought it off of me lives near by. he runs it on gas, do you want me to see if he will sell the alky carb? it a PWK 39mm.
Posted by: dsmike
i bought the carb from CARB PARTS WAREHOUSE, they set it up for alky.
i live about 2 hours from atoka. and the guy that bought my old bike doesn't race it. i don't even know if he rides it. it will take me a day or 2 to chase him down.
it also had the delta V-froce reed cage do you have one? would you want me to see if he will sell it also? i had everything done to this motor.
Posted by: dsmike
i have a packard motor that i haven't got to run on a track yet. i still have a stock frame so i don't know what times to excpect from it.
Posted by: dsmike
did you run a 4.19 at atoka?? how much faster are the other tracks from atokas?
Posted by: northjeepster
As you can see below that's what im running just now putting it back together and have no idea how fast its going to be I'm also running carbon fiber rims and hoosiers. I'm thinking it going to haul A$$.
Posted by: northjeepster
No nos yet but maybe later after I learn how to ride the beast. I'm running 110 leaded racing fuel. 3.00$ gal. not bad price most VP fuels I've found were 7-8 dollars gal.
Posted by: northjeepster
I've found it 3.00 gal if you buy 30gals or more
Posted by: dragracer789
iv seen a 250r go 3.6 to 3.7
Posted by: dragracer789
oh, sorry i didnt metion it had a xc 700 motor in it. lol
Posted by: DaBeechMan
I think we had a somewhat interesting topic going before 660 closed it down...(lol a raptor being the fastest on the board..haha heh jk) anyways what are some of your times. We have a gas 370 honda that runs 4.9's with another 1/10 to 2/10's i feel we can get out of it. We have a couple drag honda's but havent been clocked in the sandwith them. I went on a heavy/wet/dirt track and ran a 4.7 with it. I think we can get a 4.3-4.4 out of it. What about some of you other guys? Our bikes are on meth, no fuel additives. What do you guys run?
Posted by: DaBeechMan
Should run good, any nos on that beast? Running gas or methanol?
Posted by: DaBeechMan
7-8 dollars a gallon is pretty steep for race fuel. I pay 4.60 a gallon for 110ERC race fuel. For methanol i pay 2.40 a gallon. Some of the bigger shops around i think get about 6 bucks a gallon from trick and VP though. A lot just depends on who you know?
Posted by: DaBeechMan
Your close zilla but the fastest 250r was by Dennis Packard of Packard Enterprises. He went a high 3.8 on a pilot honda. We arent that extreme in our bikes nor are we trying to obtain any record (lol impossible for small town guys). Our drag bike is stretched but it is still suspended and substantially smaller then the 450+cc single cylinders out there. Our next direction might be a rotax/honda breed. Ive seen them run into the 4.2's. Thats fast enough for us on a single and still have it somewhat reliable. I know packard has to rebuilt his after every weekend or track event
Posted by: DaBeechMan
you'll pick up a couple 1/10's. Depends on how good your setup and tuning is. Id say a 4.8 or so, depending on what you consider "low 5's"
Posted by: DaBeechMan
3.6 on a 250r? it didnt utilize a 250r bottom end...couldnt have. Id have known about it.
Posted by: DaBeechMan
last weekend packard went 3.7 on his 580 superior sleeve in the 100
Posted by: DaBeechMan
there are plenty of true R's that run under 4.6. Who is your buddy that has a rotax that ran a 3.5. What track was this at
Posted by: Zilladaddy500
Hey guy's the fastest Honda 250r was 4.0 in 100yrds on meth.I think your headed in the right direction with yours.My Zilla does 4.53's without nos,havent had it timed yet with it.
Posted by: Zilladaddy500
Oh yeah that's right,I remember seeing that in Dirt Wheels.
Posted by: Zilladaddy500
I'm using the Lectron on gas and so far has done great for me.I do have one set up from Dennis Packard for alky.If your into Drag racing or Hillshooting this is the carb for you.I first ran the Mikuni 44mm 4.9's in 100yrd dash,bought the Lectron gas carb and it was like night and day difference,after tuning it though.Now my quad does 4.53'S in the 100yrd dash.These carbs are made for Drag Racing.
Posted by: Zilladaddy500
4.0's cool,wish I could get alky right on mine,I'd run both alky and N.O.S.
Posted by: POLARISFREAK
Have a 97 polaris sport running low 5's with hpd race mod on race gas, thinking of switch to methanol, how mych hp do you think I can gain.
Posted by: POLARISFREAK
What's the best kind of carb to run. I see ftz has some and some of the guys on this forum are high on lectron?
Posted by: POLARISFREAK
WHAT MODS DO YOU HAVE? STAGE 2,3 OR 4?
Posted by: POLARISFREAK
I'm going to run at atoka this year. I'll be there for the test and tune next month. I also go out to Sahara when I get a chance. I actually live in Prague, ok, I just work in Tulsa.
Posted by: POLARISFREAK
Did you have alot of problems with it. I was thinking of switching to alcohol but I wanted to see what it ran on race gas first. I hope to run somewhere around 5.2. I'd like to stay in the mp2 class, I think that's 5-5.75 is this correct?
Posted by: POLARISFREAK
Yeah, see what he wants for it. I'll send you a private message with my email and phone #. Did you convert it to alcohol or was it set up for alcohol? I have never had this one there. I have a trail mod sport that ran a 6.1. Other guys on this forum have run low 5's with the same setup so we'll see. I've take alot of weight of it. It weighs around 390. I've talked to the moose a few times. How far is poteau from atoka. Does that guy that bought yours race it.
Posted by: POLARISFREAK
Yeah, see what he wants for all of it and let me know.
Posted by: TotallySuicidal
i have a 86 lt250r frame with a kaw750cc H-2 about 156hp it run low 4's on racing fuel
Posted by: TotallySuicidal
That was spinning all the way down the track and still picking up a lot of speed and the end of the track. I have been clocked with police radar at over 130+mph by the michigan state police last year. Needless to say it was a friend of a friend the was running the radar so yes i am still walking the streets and tearing up sand.
Posted by: pureinsanity
Meth will get you a 15% increace in hp about a 1/10 of a second in a 100 yd but meth is really hard on moters I have a 440 banshee that weight is about 215 pounds on meth that runs 4.19. I never seen a true R run any faster than 4.65 on sand and that was a 350 yes you could put a rotax in a R frame and it would run in the threes my friend has a banshee with a rotax and it runs 3.5 but to me when you do away with the origial juggs it not a true banshee or R .
Dragracer789 I have a question for you I just bought a 88 R and put a ct 310 hi rev haven't rode yet are they fast or so so any et on R appreicate any info. Also I race at atoka and texas and now ponica city
Posted by: pureinsanity
NO Atoka is about 1/10 to 2/10 slower Texas is the fastest track at atoka I run 4.25 to 4.30
Posted by: pureinsanity
his name is kyle ellis and it was at atoka
