Pages: 1
Posted by: bpace
I'll check aroung for a used case for you. You can always get you a new one from Honda for around $200. Invest in a case saver. The clutch part you are needing is called the "clutch center" or "clutch center hub". If you look at the clutch pack with the pressure plate removed, it is the piece in the middle being held on with the big nut. You will have to get this part from Honda.
Posted by: 87_250R
i think nac's has them there number is 914-246-3086 and the web site it does not list it [URL]www.nacsracing.com/[/URL]
Posted by: 87_250R
HONDA OEM CLUCH UPDATE KIT comes with new cluch pressure plate, push rod, push rod end, needle bearing and thrust washer. from Nac's part# 06220-HB9-305 the price is $54.25 hope this helps
Posted by: 87_250R
hope you get it fixed soon and can be roosting on the trails soon (or were ever you ride mx, xc, dunes)
Posted by: retro
Try [url]www.calatv.com[/url] or [url]www.eastcoastatv.com[/url].
ERIC
Posted by: mx87trx
Brad, I recently purchased a mx ready '87 250r. The problem is after riding for about a week I threw the chain and cracked my center case. I need to know where I can get a good used or new case. Also I am putting the clutch back to a stock setup vs. the racing setup and I am told that I need a new "inner" clutch basket, but I have never heard of this part, could there be another name for it.
Any help would be appreciated.
Thanks, Chris
Posted by: mx87trx
Hey thanks guys I have all the parts ordered and on their way. The case was a nice chunk-a-change though($317). OUCH!!! Oh well, Thanks again guys.
Chris
