Pages: 1
Posted by: AlkyBurninX
If it is for that 82 R, it should be 4/130 stock. It very well could be 4/115 (banshee, blaster, warrior, raptor) pattern if the axle spline is the same as a 200x, which I think it is. The 200x uses the same spline as yamahas, so using 200x hubs is the easy way to put 250r pattern 4/110 on a banshee.
Posted by: NiteKrawler
Someone changed the hubs!
I measured it @ 4.5" and this chart shows it to be 114 which I assume is a 110 or 115 bolt pattern?
http://www.hawkmicro.com/convert/Convert_HawkMicro.htm
Posted by: NiteKrawler
The Atc in my photo is my daughters which is stock with a 4x130 although, my son's new Atc 250r 82' isn't. By the measurement, I assume its a 4x115 then?
