ATV Connection Magazine

Sunl Hanma won't start after using remote

(Click here to view the original thread with full colors/images)




Pages: 1


Posted by: MUDDY4LIFE

My local dealer use to sell those Sun L Hanma...They look good but sure do give the customers alot of touble.. Add to the fact that you cant get parts for Sun L products, you just bought yourself a DISPOSABLE ATV.

Good luck with your problem.

Posted by: pcpacker

This unit started right up and was working fine until I used the alarm fob to shut it down (just practicing). Now I can't get it to spark. Is there a way to reset this so that my kids can ride it?

It is the 07 Hanma r5

Thank you

Posted by: pcpacker

I tried that and it didn't work. Why do you have to be away from the atv? That seems strange that you wouldn't want the receiver to pick up the unlock signal.

Thanks again

Posted by: pcpacker

So I am not a mechanic by any means, but wouldn't unplugging that battery for 2 minutes do the same thing? Either way it loses power right?

Thanks

Posted by: pcpacker

I knew it was disposable when I bought it. I just was planning on at least a year or two. If I can get this thing to reset, I will be doing fine. Thanks for your concern.

Posted by: MAS

greetings: had the same problem. get away from atv, hold remote start button down for 30 sec, don't use remote again. i went into house to do this so i would not be sending any signal to atv remote pick up.

Posted by: MAS

also---the button to hold down is the remote unlock button----should look like an un-locked lock

Posted by: bigborehonda20

unplug the remote box and wait 2 min. then plug it back in. It is under the seat.