Pages: 1
Posted by: LT80
Shredders.
You sure the middle number is 9? Sure seems wide.
I'd get the 18x6.5x8's personally.
Posted by: Fastestdad
We run the shredders out back. Trails or dirt dragracing they hook up well but I like the snowhoggs alot too.
Posted by: nitrox
Try http://www..4atvtires.com
Posted by: rocket35
I am looking to find some of the stock Eton rear tires from the Viper 90. The size is 18X9X8, but all I can find are the 18X10X8's. Anybody have any idea where I can find the smaller size? Thanks!
Posted by: rocket35
I was thinking about the Shredders as well. I am certain that the stock Eton 90's, at least in 2005, came out with a 18X9X8 maxxis tire. The reason I didn't want to go with the 18X6.5X8 is that the only tire I know of that size is the snowhog. It is undersized at closer to 17X6.5X8 from what I hear and I would like to have the extra ground clearance. We ride a lot of trails as well, so that might be a problem with the smaller diameter tire. It sure would be nice to get the 9" wide tire though. If the snowhog were a full 18" tire, that would be a great alternative.
Posted by: rocket35
Okay, I figured it out. They are the Maxxis M940 and are stock on the Eton Viper 90. I stumbled across it and thought I would share. It was amazingly difficult to find info on it. I guess if I had a viper sitting in front of me I could have taken the model number off it, but I didn't. They look like good tires and are a nice middle point between the snow hog and a 10" wide tire if you don't want to go with the turf tamer.
